Interesting replies. I tend to leave the switch in the rear most position with the blend centered with a little bass bass boost and treble cut. Gives me the smoothest sound. But I dig all the positions really. So many possibilities.
TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
Hi all,
I am not a Lakland owner, but few days ago I had a chance to record one, so I did. I compared it in the same mix with 3 other 5-string basses that I had available at that moment. My impressions of Lakland are excellent, even though this particular piece is very heavy.
Here is a recording I made:
Love the PJ 5564!
Lots of subtitle shading with the Lakland 55-94 inside the mix just changing the attack or release of the note. Granted I’m a bit biased but the 55-94 gets my vote in the demo. Just my take of course.Nice comparaison, great playing and editing - that's a very nice 55-94. Thanks for sharing with the LOG!
Lots of subtitle shading with the Lakland 55-94 inside the mix just changing the attack or release of the note. Granted I’m a bit biased but the 55-94 gets my vote in the demo. Just my take of course.
Hello everyone!Thanks Man,
Hoping that the Nordstrand Preamp Install would take this to the next level haha. Not enough dough for the big splits so this is not the last stage haha






CoolAfter 18 long yearsss, my 1st one as a Lakland Artist, I finally have a new bass! Sharing my Lakland USA Classic 55-14 in Aged Sherwood Green
This is just my second bass after getting my Lakland Basses 55-01 18 years ago. This is my first time owning a USA made bass and I truly saw, felt and heard the craftmaship that was put by the whole team in Chicago.
Will need to dial in my tone and get used to the mm j config but trully blessed to be able to make music with this masterpiece
View attachment 7463409View attachment 7463411
View attachment 7463415
You scored with that deal. A 2002 Scheff is a rare findEnded up trading for a 2002 Jeff Scheff. Which I am very happy with!
Still going to sell my 2006 DudePit.
I'm sorry but I still don't understand what You mean by ''Lots of subtitle shading with the Lakland 55-94 inside the mix''. (Maybe it's my fault because English is not my first language)Unlike a lot of other basses Lakland’s tone controls on the preamp are really sensitive. Moving them a just few degrees changes the tone quality.
I can hear a difference in tone while he;s with the Track..The Lakland Pre and pickups make it easy to dial in a different sound from the bass on the fly.
Hi all,
I am not a Lakland owner, but few days ago I had a chance to record one, so I did. I compared it in the same mix with 3 other 5-string basses that I had available at that moment. My impressions of Lakland are excellent, even though this particular piece is very heavy.
Here is a recording I made:
They can last a good long while. Generally speaking mine go at least 6 Months before I have to chante them. I've never had one go out in the middle of a set. I use one of Keith McMillen's Batt-O-Meter that works from the jack. and gives me a reading of the battery's output.Lakland Owners, what is the expected lifetime (in hours) for a 9 volt battery driving the LH3 preamp in a recent 55-02? Also, will the the preamp stop all at once when the battery dies, or will performance/volume degrade over time as the battery gets weaker? I'm putting several hours a day on my new axe, and curious if there will be an obvious moment when I know it's time to change the battery. Thanks!
Welcome back, you're definitely in the right place with that beauty! Congratulations on all fronts!After 18 long yearsss, my 1st one as a Lakland Artist, I finally have a new bass! Sharing my Lakland USA Classic 55-14 in Aged Sherwood Green
This is just my second bass after getting my Lakland Basses 55-01 18 years ago. This is my first time owning a USA made bass and I truly saw, felt and heard the craftmaship that was put by the whole team in Chicago.
Will need to dial in my tone and get used to the mm j config but trully blessed to be able to make music with this masterpiece
View attachment 7463409View attachment 7463411
View attachment 7463415
They can last a good long while. Generally speaking mine go at least 6 Months before I have to chante them. I've never had one go out in the middle of a set. I use one of Keith McMillen's Batt-O-Meter that works from the jack. and gives me a reading of the battery's output.
Cool meter! I will look into getting one of thoseThey can last a good long while. Generally speaking mine go at least 6 Months before I have to chante them. I've never had one go out in the middle of a set. I use one of Keith McMillen's Batt-O-Meter that works from the jack. and gives me a reading of the battery's output.
View attachment 7463563- on my acoustic electrics, a battery last around 40 hours of plugged in play time - on my Laklands, they seem to last forever as I don't play them as long or leave them plugged for extended periods - definitely can sense a change is needed with a weaker signal and thinner sound, distortion if pushed further or evident when recording
Hi all,
I am not a Lakland owner, but few days ago I had a chance to record one, so I did. I compared it in the same mix with 3 other 5-string basses that I had available at that moment. My impressions of Lakland are excellent, even though this particular piece is very heavy.
Here is a recording I made:
Hi all,
I am not a Lakland owner, but few days ago I had a chance to record one, so I did. I compared it in the same mix with 3 other 5-string basses that I had available at that moment. My impressions of Lakland are excellent, even though this particular piece is very heavy.
Here is a recording I made:
DR Strings are long enough to string through the body. I used to love 45-125 Lo-Riders but these days they are a bit stiff for me in 35-inch scale Laklands. I'm developing a lighter touch.Curious if you guys with the 35 scale fivers find that they benefit from a hex core string for a little more stiffness. I usually use EB slinkies which I love but I’m thinking about trying some nickel lo riders. Curious if the regular set will be long enough since I string through the bridge only.