After I got my 8x10 I cranked my V4B once to see and once so my brother could hear. Lots of distortion but it t was definitely loud.
TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
It seems as "4" is pretty much the max most will useI have the Hartke LH1000 and have played live with it through my HD115 in a medium sized venue and had no need to turn the volume up beyond 4
It seems as "4" is pretty much the max most will use
U build amps you say?Depends a lot on the effective taper of the master volume pot. The amps I build don't usually max out until at least 7-8/10, and I run them all above 5/10 pretty much all the time on gigs, even quiet jazz stuff with no drums. My gain control is usually between 8 and 10 too, unless I'm running a very hot bass with a lot of EQ boost.
I love a hot signal allowing a light touch.i turn my amp almost full up and use a pretty light touch. sounds like a very huge mammoth tone rolling down a hill. it takes a while to get the right touch on the strings, but well worth it!
U build amps you say?
I feel the same way lolGod, no. I've never needed to, and I'm always terrified of blowing a speaker with a low B or A.
What's the prices on them ampsYep, just for myself and just for the fun of it. After a few decades of repairing 'em it seemed like time to take a stab at putting my own spin on things. Link Removed
There's an overview on most of my more recent DIY stuff here. There are also several build threads listed in the AMPs FAQ DIY section stickied at the top of the Amps Forum index page.
What's the prices on them amps
... just curious on if any of you have really cranked your bass amp to max or close to it??