• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

My New Studio Build (perhaps overly detailed)

Getting close
7D0D3D54-4744-4F9A-B8BB-A3AE3733CC64.jpeg


Main room is done
7FF0801C-D9B2-45E5-A4D0-E30F14884CFA.jpeg
 
A few tiny spots in the main room to touch-up, but I’m going to wait for it to fully dry before going back to it. I also have to wait for the vestibule ceiling to dry before I can tape the wall/ceiling corner and do the vestibule walls. A smarter person would have done the vestibule ceiling first, then the main room, then the vestibule walls. I am not a smarter person :p
 
Everything online says to wait at least 12 hours before taping over freshly applied paint. Looks like the vestibule walls won’t get finished until tomorrow. That’s still a day ahead of schedule. With a little luck I might even have the HVAC components mounted on the north wall by the end of the weekend, which was something I wasn’t planning on getting to until next week. Huzzah!
 
Everything online says to wait at least 12 hours before taping over freshly applied paint. Looks like the vestibule walls won’t get finished until tomorrow. That’s still a day ahead of schedule. With a little luck I might even have the HVAC components mounted on the north wall by the end of the weekend, which was something I wasn’t planning on getting to until next week. Huzzah!

I’m not the greatest painter on the planet but I prefer to cut in by hand.
 
I’ve never been great at doing it without tape. I still cut in, but I put the tape up as a safety net.

Haha, nice try but your application to the club has been denied.

“Cutting-in is the practice of manually drawing straight lines of paint alongside elements that do not get painted, eliminating the need for masking tape or painter's masking film.”

I’m only busting chops.

To be honest the time it takes to lay tape perfectly straight without waving seems more difficult then going super slow with a small brush.
 
  • Like
Reactions: Matt B
In news unrelated to painting: I’ve decided not to hang the HVAC units today. Since I’m mounting into metal hat channel I can’t use the screws included with the units. I have sufficiently sized drywall screws, but they have very low shear and head strength in applications where they’re not embedded into drywall. I don’t want to have them fail and send my HVAC components crashig down and tearing things out of the wall. I’m going to step back and do some more research on an appropriate type of screw before purchasing anything and installing it.
 
Upon further contemplation I’ve decided not to repaint the vestibule. The color didn’t dry exactly how I wanted it, but it’s close enough that once I fill the space with drum racks (and drums), cable hooks, my mic locker, bass and guitar cases, etc. it won’t be an issue.

A lighter color in the vestibule can work to your advantage. When you have a brighter space for storage, it is easier to locate stuff.

Are you planning any cubby holes or shelving for that area?

I use really useful boxes Invalid Link Removed for cable and equipment storage. Good products. Staples carries them.
 
A lighter color in the vestibule can work to your advantage. When you have a brighter space for storage, it is easier to locate stuff.

Are you planning any cubby holes or shelving for that area?

I use really useful boxes Invalid Link Removed for cable and equipment storage. Good products. Staples carries them.
The lighter color was always the plan. The issue is that it dried quite a bit closer to baby blue than the light gray from the sample.

Vestibule storage area will include a rack for drum shells with a bay underneath for drum hardware and mic stands. On the opposite side will be a cabinet to serve a small my mic locker with bass and guitar case storage above it. On the walls opposite the entry door will be cable hooks.
 
  • Like
Reactions: beans-on-toast

Latest posts