• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

NPD DSM Noisemaker OmniCabSim

Thinking about picking one of these up in the next preorder batch, but I have a few questions:

When you bypass the pedal it turns off the cab sim on the 1/4" Output, so I would be getting the same signal as from the 1/4" Through? What about the XLR out, is it functional when the pedal is bypassed, and if so, is it just outputting the clean, unaffected signal? In other words, can I use this as a plain DI with no cab simulation active if I happened to need to?

Also, I understand that the High Response is a low pass filter, but is the Cab Size control essentially just a high pass filter, something that I could use for speaker protection similar to a Micro Thumpinator or Broughton H+LPF?

Thanks guys!
 
  • Like
Reactions: cataract
Thinking about picking one of these up in the next preorder batch, but I have a few questions:

When you bypass the pedal it turns off the cab sim on the 1/4" Output, so I would be getting the same signal as from the 1/4" Through? What about the XLR out, is it functional when the pedal is bypassed, and if so, is it just outputting the clean, unaffected signal? In other words, can I use this as a plain DI with no cab simulation active if I happened to need to?
Yes, yes, and yes.
Also, I understand that the High Response is a low pass filter, but is the Cab Size control essentially just a high pass filter, something that I could use for speaker protection similar to a Micro Thumpinator or Broughton H+LPF?
Yes this will work, although the HPF frequency cutoff will be a little bit higher (>= 50Hz) than the Thumpinator (~30Hz if I remember correctly).
 
  • Like
Reactions: cataract
New pedal day //
D04E91A5-4403-475A-BDAB-217A25C6BEDE.jpeg

Zero complaints! Love how the Omni just kinda pulls everything together!
 
New pedal day //
View attachment 2942522
Zero complaints! Love how the Omni just kinda pulls everything together!

It absolutely does that. And with the IR cab sim getting more attention I love having the ability to make adjustments on the fly with the OCSD and not having to sit at the computer and fiddling in a software.
 
This is representative of my current settings, though I'm still experimenting a little with the mid shaping...

IMG_20180305_161952.jpg


Polytune, Cali76-TX, Alpha Omicron, Reiner Gasoline, MBD-1, B7KU, Contour Pre, OCSD, Decimator II, Radial JDI

I've come to the realization that I'm not into modulation, so my board is basically just different flavors of overdrive and distortion.