pedal boards

[Phil Smith]

I'm using the SKB board and have been for about 3 years now and haven't had a problem with it. Recently I decided to use a Radio Shack adapter with it that 800ma as opposed to the 500ma adapter that came with the board.

I'm just looking for a way to squeeze a Boss DD6 pedal I just got onto it.

[Invalid or Expired Link Removed]

 

[Rumzini]

OK...it's the second time I've seen one of those Deep Impact thingamabob...what the heck is it? It looks nice.

 

[David Wilson]

OK...it's the second time I've seen one of those Deep Impact thingamabob...what the heck is it? It looks nice.

it's a bass synth pedal, one of the best ever (close call between it and the korg g5). Now discontinued and fetching silly amounts used on ebay.

 

[fenderbassabuse]

I'm now building one. What is the best not-permenant way to attach pedals? I also am planning on adding a PSU for my pedals, (boss ODB-3, Boss GEB-7 and EHX Q-tron) and do not want to spend silly money on one. Also what leads are the best to use to connect them up with, again without spending silly money.

 

[Corwin81]

I'm now building one. What is the best not-permenant way to attach pedals? I also am planning on adding a PSU for my pedals, (boss ODB-3, Boss GEB-7 and EHX Q-tron) and do not want to spend silly money on one. Also what leads are the best to use to connect them up with, again without spending silly money.

use zip ties to secure the pedals.

 

[Rumzini]

I wanaa build one also...I have hundreds of zip ties...what about velcro tape???

 

[murdermilk]

4.5 square feet of plywood and some velcro and duct tape worked for me

 

[fenderbassabuse]

use zip ties to secure the pedals.

How? The wood I have is about 1/4 inch thick
Should I Use some 7mm ply instead?

 

[Funkster]

I grabbed a pkg deal on a one-spot and pedal board light to go with it from Mojo-gear it has worked flawless so far.
Link Removed
The case is one of those cheepo Warwick Rockcase pedalboards. Serves the purpouse..
From left to right top, SansAmp, Rolls A-B-Y, GBE600 pedal, Boss TU2,
Bottom left to right,
Boss CE2B, Boss BF2B, Akai Deep Impact, Flaming funkdrive by Roger, Tube Works Blue Tube

 

[Josh Ryan]

I use a pedalboard from nycpedalboards.com and a OneSpot power adapter. Works wonders.

ditto, simple, high quality, and affordable.

 

[Tecx]

I also have a NYC, and I will be ordering a new one from mike soon...

Alex

ditto, simple, high quality, and affordable.

 

[keb]

From left to right top, SansAmp, Rolls A-B-Y, GBE600 pedal, Boss TU2,
Bottom left to right,
Boss CE2B, Boss BF2B, Akai Deep Impact, Flaming funkdrive by Roger, Tube Works Blue Tube

Oh man, that pic made me miss my old Blue Tube pedal. I sold mine (and a Boss CE2B chorus as well, incidentally) to my brother years ago. I wish I hadn't! Here's a little tip for gear heads: Don't sell your pedals and stuff, you may miss it one day. Well, unless you need the money or something.

 

[fenderbassabuse]

What is the website for nyc pedalboards?

 

[David Wilson]

What is the website for nyc pedalboards?

nycpedalboards.com?

 

[tplyons]

Check these boards out too...

Very industrial looking.

Link Removed

 

[dirtgroove]

GBE600-
What's that?

 

[Mo'Phat]

He plays a Genz Benz GBE600 Amplifier, it's the footswitch for it. Not sure what it switches, but probably EQ on/off and compression. It's not an effects pedal, per se.

 

[Funkster]

He plays a Genz Benz GBE600 Amplifier, it's the footswitch for it. Not sure what it switches, but probably EQ on/off and compression. It's not an effects pedal, per se.

The button on the left switches back and fourth from Tube preamp to F.E.T preamp and the button on the right mixes both channels on this head..
Invalid Link Removed

 

[dirtgroove]

[eyes widen] Oooooh! shiny!

 

[Beammeup]

Here's my new board