pedal train nano

[glocke1]

I need a smaller pedal board for use on cramped stages..Will the Cooks DC7 fit on this?


Pedaltrain Nano+ 18"x5" Pedalboard with Soft Case

 

[SteveC]

Yes. I had one mounted underneath my Nano. It was awesome.

 

[glocke1]

Yes. I had one mounted underneath my Nano. It was awesome.

thanks...you had the soft case with it? Did you find it to provide adequate protection for your pedals?

 

[LawrenceKanter]

Can you mount with Velcro? Is there enough clearance?

 

[SteveC]

Can you mount with Velcro? Is there enough clearance?

Yep.

 

[Stubb]

DC7 goes fine with the CIOKS bracket or velcro under a Nano+. Not sure about a regular Nano.

 

[Hypocrite]

DC7 will fit just fine underneath a Nano. I would go for the 4 though.

 

[DuluthDank]

I love my Nano. I use it with a Cioks 4, which can be powered by a chargeable phone battery bank. I strap the case to my gig bag and throw it all over my shoulder, and when I get to the gig, I don't have to worry about outlets for it.

 

[SteveC]

thanks...you had the soft case with it? Did you find it to provide adequate protection for your pedals?

Yes

 

[Auspuff]

Picked up this very well made, 18" X 6"ish, Stickman, on Reverb, for $40.00.

 

[mmbongo]

I need a smaller pedal board for use on cramped stages..Will the Cooks DC7 fit on this?


Pedaltrain Nano+ 18"x5" Pedalboard with Soft Case

yes.

Cioks or Eventide Grip under a Nano? YES!

 

[quilanthegreat]

The MXR Mini Iso-Brick is also a good option. Tiny and completely isolated power supply.

 

[Relsom]

I've got the Nano+ and the Eventide version of the DC7. It mounts perfectly underneath with the CIOKS/Eventide bracket.

 

[N. Kentucky Bass]

I had a Nano but sold it and switched to a Nano+. The Nano was just a tad too small. As you swap pedals and experiment, it's good to have a bit of extra space just in case. And the Nano+ is still quite small! Here's my current configuration for either electric bass or double bass:

 

[pfschim]

Not the Nano, but the softcase for my Metro seems to protect the pedals pretty well ... for a soft case. Probably the same softcase material. I have my Noble DI and Cali76 on it and they have not taken any kind of physical hits in 3 years of use.

 

[AaronVonRock]

The Nano softcase protects the pedalboard and pedals just fine.

 

[gonzkal]

Another happy user of a DC7 mounted underneath a Nano+ thanks to the Cioks Grip! The soft case works well at protecting from scratches and minor liquid spills/rain. I used to carry a PT Jr. with a similar soft case as a sling bag on my bicycle between rehearsals/gigs, never had an issue in 2-3 years.

 

[SemiDriven]

Yep, a DC7 will fit under the Nano+ as well as the Nano.

I went the velcro route -- no issues.

 

[bucephylus]

I've got the DC7 under a Nano driving a SLO IIIs.

That's my basic preamp FX board, somewhat mimicking the GK MBE150 front end with boost and chorus.

I've also got a DC5 under a Nano+, which gets a bit more FX rotation, but usually includes a looper.

The stock Nano soft case is ok at best. I don't use it, because the closure / opening is a PITA to use. The stock soft case for the Nano+ is outstanding, and gets regular use. Why that company doesn't make the smaller case the way the larger case is constructed is somewhat baffling.

 

[Hummergeist]

+1 for Nano with Cioks 4 velcroed below. Tolerances are tight and I spent a lot of time getting just-the-right-length cables but it all fits.