• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Please recommend a simple boost

This one's pretty good...

Good boost.jpg


https://www.amazon.com/COSCO-11330C...n+step+stool+chair&qid=1680786641&sr=8-7&th=1
 
As an Amazon Associate, TalkBass may receive commissions from qualifying purchases made via links on this site.
  • Like
Reactions: grocker and fig
My passive bass puts out lower output, I'm just wanting a little boost to get a little more volume out of my Mesa subway head. Basically i just need a little more to drive the gain stage a bit ,so I don't need to turn it up as much to get volume..I'm not talking about crazy boost just a little..
Please recommend a bass guitar boost pedal that's no frills, quiet and under 100 bucks.
?

Xotic RC Bass Boost is what I use.
 
  • Like
Reactions: grocker
My first thought is that if you need more volume, the problem is that you need either a more powerful amp or, more likely, more speaker area. If you're already maxing out the input gain and output volume on the amp, boosting the input with a pedal will likely cause clipping and/or overpower your speaker(s).
For the First Time in History, the Lobster is wrong with the dogma. I wouldn't have thought it possible as I rely on Lobsters reviews!
I have a few basses, the lowest output one is a Dan Electro Longhorn and the loudest/hot one is a Sterling Sub. They both have "issues" because of this. The Longhorn needs a boost and the SUB can't be used with some pedals without a volume reduction on the bass volume knob (forbidden usually). Sometimes it's a benefit too--the Longhorn interfaces perfectly with old school pedals like the EH Bass Micro Synth, and the SUB sounds great direct into an amp and can actually overdrive in input a little (which I like the sound of).
 
Here’s my advice. Don’t get a pedal.

Try these steps in order.
1. Turn up your amp.
2. Play with a lighter touch.
3. When you need volume. Dig in and play that bass!!

So, my advice is to add dynamics to your playing. If that doesn’t work, you need a better amp.
 
Mesa Subway amps have a linear taper to the pots, which means that, unlike many other amps, the volume increases uniformly across the entire knob range. Don't be afraid of turning them up. I suggest checking the manual for recommended input gain and master levels. I play passive basses through multiple Subway amps (D350, D800, D800+) and don't need a boost.
 
  • Like
Reactions: grocker
You have me confused with a different crustacean. @LowEndLobster's errorless streak continues.

Me, I'm wrong all the time.
Oh! I Did Not Know That. I hope your tail is notched so you will never be cooked (although by the bright red color maybe you have been served, literally) Anyway my advice was for people using multiple basses of different outputs, if it's just one bass I'd use the amp's own pre and master volume, set and forget.
 
  • Like
Reactions: Lobster11
As an Amazon Associate, TalkBass may receive commissions from qualifying purchases made via links on this site.