Precision body with Jazz neck

[wintremute]

Which companies (if any) make a Precision (not a PJ, just a P) bass that comes standard with a Jazz neck?



Here are the answers for companies with current basses (so far):

Invalid Link Removed

All USA G&L basses can be ordered with a J neck. Their traditional P-bass is the LB-100. The SB-1 has a single split-coil, but it's the monstrous MFD, which is very hot with heavier lows than a traditional alnico split-coil.

Invalid Link Removed

Some Nash PB63s

Carvin PB-4 is close

You can now add Fender Japan to the list.

Invalid Link Removed

Hama Okamoto P-Bass

 

[Aaron75]

Invalid Link Removed

 

[vaesto]

Well, Fender itself. Invalid Link Removed

 

[5544]

G&L SB-2

• CONSTRUCTION: bolt-on
• SCALE: 34"
• PICKUPS: Leo Fender†-designed G&L MFD™ split-coil (neck) and single coil (bridge)
• BODY WOOD: Alder on Standard and all solid finishes, Swamp Ash on all Premier finishes
• NECK WOOD: Hard-Rock Maple with choice of Maple or Rosewood fingerboard
• NECK PROFILE: G&L [Invalid or Expired Link Removed] with 9 1/2" radius
• FRETS: Medium Jumbo, Jescar 57110 18% nickel silver
• TUNING KEYS: Custom G&L "Ultra-Lite" with aluminum tapered string posts
• BRIDGE: Leo Fender-designed G&L Saddle-Lock™ with chrome-plated brass saddles
• ELECTRONICS: dual-volume
• CASE: deluxe Tolex hardshell

G&L Tribute SB-2

• CONSTRUCTION: bolt-on
• SCALE: 34"
• PICKUPS: Leo Fender†-designed G&L MFD™ split-coil (neck) and single coil (bridge) made in Fullerton, California
• BODY WOOD: Basswood
• NECK WOOD: Hard-Rock Maple with Rosewood fingerboard
• NECK WIDTH AT NUT: 1 1/2"
• NECK RADIUS: 12"
• NECK PROFILE: medium C
• FRETS: 21 medium jumbo, nickel
• TUNING KEYS: Traditional open-back
• BRIDGE: Leo Fender-designed G&L Saddle-Lock™
• ELECTRONICS: dual-volume

 

[brendanbassix]

These days it's harder to find a P with a P neck!

 

[Malak the Mad]

There's the new "Fender Deluxe PJ" FSR made for Guitar Center which has been getting some strong praise here on TalkBass.

Invalid Link Removed

Also, if you turn the WABAC Machine to 2008 and earlier, there's the Squier Standard Precision Bass Special.

 

[Laklandfan]

I think Sadowsky or a builder like that would if you ordered it that way.

 

[wintremute]

There's the new "Fender Deluxe PJ" FSR made for Guitar Center which has been getting some strong praise here on TalkBass.

Invalid Link RemovedBass

G&L SB-2

• CONSTRUCTION: bolt-on
• SCALE: 34"
• PICKUPS: Leo Fender†-designed G&L MFD™ split-coil (neck) and single coil (bridge)
• BODY WOOD: Alder on Standard and all solid finishes, Swamp Ash on all Premier finishes
• NECK WOOD: Hard-Rock Maple with choice of Maple or Rosewood fingerboard
• NECK PROFILE: G&L [Invalid or Expired Link Removed] with 9 1/2" radius
• FRETS: Medium Jumbo, Jescar 57110 18% nickel silver
• TUNING KEYS: Custom G&L "Ultra-Lite" with aluminum tapered string posts
• BRIDGE: Leo Fender-designed G&L Saddle-Lock™ with chrome-plated brass saddles
• ELECTRONICS: dual-volume
• CASE: deluxe Tolex hardshell

G&L Tribute SB-2

• CONSTRUCTION: bolt-on
• SCALE: 34"
• PICKUPS: Leo Fender†-designed G&L MFD™ split-coil (neck) and single coil (bridge) made in Fullerton, California
• BODY WOOD: Basswood
• NECK WOOD: Hard-Rock Maple with Rosewood fingerboard
• NECK WIDTH AT NUT: 1 1/2"
• NECK RADIUS: 12"
• NECK PROFILE: medium C
• FRETS: 21 medium jumbo, nickel
• TUNING KEYS: Traditional open-back
• BRIDGE: Leo Fender-designed G&L Saddle-Lock™
• ELECTRONICS: dual-volume

Well, Fender itself. Invalid Link Removed

Those are PJs. I mean just a P. I'll update the original post.

 

[wintremute]

I think Sadowsky or a builder like that would if you ordered it that way.

I'm not asking about custom orders. I mean ones that are just normally made that way.

 

[Nedmundo]

All USA G&L basses can be ordered with a J neck. Their traditional P-bass is the LB-100. The SB-1 has a single split-coil, but it's the monstrous MFD, which is very hot with heavier lows than a traditional alnico split-coil.

 

[wintremute]

All USA G&L basses can be ordered with a J neck. Their traditional P-bass is the LB-100. The SB-1 has a single split-coil, but it's the monstrous MFD, which is very hot with heavier lows than a traditional alnico split-coil.

The SB-1 is the bass I've really been gassing for, but I didn't think it would come with a Jazz neck. Do you have to do special orders with G&L? You can't just go to a music store and they have the latest models?

 

[mpdd]

The SB-1 is the bass I've really been gassing for, but I didn't think it would come with a Jazz neck. Do you have to do special orders with G&L? You can't just go to a music store and they have the latest models?

you are probably not too far east of g&l, i bought my only new one on MF with a holiday discount

 

[BulbousMoses]

Which companies (if any) make a Precision (not a PJ, just a P) bass that comes standard with a Jazz neck?

Invalid Link Removed

 

[Not yet]

Some Nash PB63s

 

[Makatak]

And don't forget the G&L JB-2 as well.

 

[wintremute]

And don't forget the G&L JB-2 as well.

That has 2 jazz pickups, not the split precision pickup.

 

[danomite64]

Fender Duck Dunn bass

 

[wintremute]

Invalid Link Removed

I forgot about that one! Thanks.

 

[wintremute]

Fender Duck Dunn bass

Do they still make those?

 

[Turkeypills]

Peavey Fury.