• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join free Log in
    Want zero display ads or expanded classifieds tools? Compare plans.

Show me your compact pedalboard setup

#10,942
Been out of the music game for a few years. Missed it quite a bit so have restarted my gear journey. This is what I have so far. I think I want to add an Pork and Pickle, then run a JDI off the board.
IMG_1278.jpeg
 
  • Like
Reactions: Turtle71, Angry Mob With Pitchfork, Blunder and 18 others
#10,943
I'm not too picky yet about flat cables. EBS, Ernie, or cheapo Amazon stuff. I have them floating around and use all different types and so far have not had any issues yet with any of them. I make my own lead cords, too but I have little patience or time lately to make custom patch cables for my boards.
S-Bigbottom said:
EBS flat, do not want to see a cable on the board.
Click to expand...
I discovered from the comment above that I might feel the same way: I do not want to see a cable on my board either. I also don't want sloppy cables underneath the board now that I think more about it.
Cable wraps and clamps to minimize snagging cables

Everything in it's right place.
 
  • Like
  • Love
Reactions: Turtle71, Angry Mob With Pitchfork, Jakeman and 7 others
#10,948
moorebass said:
Mono Lite+ Bigfoot Edition
I owned a Khan DI in the past but sold it because its footprint and I/O layout isn't compact pedalboard friendly.

I wanted to see if it was possible to mount the Khan underneath a compact pedalboard. I've raised the heights of Pedaltrain and D'Addario pedalboards in the past by changing the feet out, but the Mono Lite and Lite+ pedalboards that I use have proprietary feet. AFAIK there's no replacement feet commercially available.

I have a pretty decent 3D printer, so I thought thought I'd try just printing my own feet. The Mono feet are friction mounted and removable, so it was pretty easy to take measurements and scale them up.

It was a bit of a balancing act getting the correct height for the feet. I needed clearance for the Kahn with Dual Lock, but I also need to make sure the board still fit in a Mono Tick (Mono Lite) or Studio Slips (Mono Lite+) bag. I cut it pretty close as you can tell in the pics.

Many thanks to @Erithon for helping with precise Khan measurements so I could prototype before I actually purchased a 2nd Khan. The measurements on the website are from an older version and incorrect.

View attachment 5420915 View attachment 5420916 View attachment 5420922 View attachment 5420926
Click to expand...
moorebass said:
Mono Lite+ Bigfoot Edition
I owned a Khan DI in the past but sold it because its footprint and I/O layout isn't compact pedalboard friendly.

I wanted to see if it was possible to mount the Khan underneath a compact pedalboard. I've raised the heights of Pedaltrain and D'Addario pedalboards in the past by changing the feet out, but the Mono Lite and Lite+ pedalboards that I use have proprietary feet. AFAIK there's no replacement feet commercially available.

I have a pretty decent 3D printer, so I thought thought I'd try just printing my own feet. The Mono feet are friction mounted and removable, so it was pretty easy to take measurements and scale them up.

It was a bit of a balancing act getting the correct height for the feet. I needed clearance for the Kahn with Dual Lock, but I also need to make sure the board still fit in a Mono Tick (Mono Lite) or Studio Slips (Mono Lite+) bag. I cut it pretty close as you can tell in the pics.

Many thanks to @Erithon for helping with precise Khan measurements so I could prototype before I actually purchased a 2nd Khan. The measurements on the website are from an older version and incorrect.

View attachment 5420915 View attachment 5420916 View attachment 5420922 View attachment 5420926
Click to expand...



Is there any way I can purchase from you? Would like 4 3D printed feet for my Mono Lite as well!
 
#10,952
jmmyoh said:
View attachment 7351024
Is there a flat board that would fit just these 3 pedals comfortably?
Click to expand...
Creation Music lets you order a custom-sized flat board: The Board | Custom Size

Other options: not flat, but sized for 3 or 4 pedals:
voodoolab.com

Dingbat® TINY - Voodoo Lab

DINGBAT TINY is the ultimate professional travel board for 3 to 4 essential effects. Secured in its included tour-grade soft case, TINY is compact enough to stow easily in the overhead compartment or beneath the forward seat of any aircraft. Combined with a compatible isolated power supply—Pedal...
voodoolab.com voodoolab.com
[This invalid link has been removed]

Flat, but likely too long for your purposes.
[This invalid link has been removed]
 
Last edited:
  • Like
Reactions: Rev_Slinky and jmmyoh
#10,955
israelfeliciano said:
Is there any way I can purchase from you? Would like 4 3D printed feet for my Mono Lite as well!
Click to expand...
Send me a DM. I have no plans to sell these commercially but I've done a few one-offs for some members here. Will need to check to see if I have any HF-TPU left over from the last run.
 
  • Like
  • Love
Reactions: Rev_Slinky, Erithon, israelfeliciano and 1 other person

Latest posts

Top Bottom
Back