Source Audio Sorcerers Society (S.A.S.S) Part 3

[pbfrog]

Hmm. Lots of numbering going on. Can I get a number? Manta, Bass OFD, hub, HH3, probably Nemesis soon. Despite my gripes about MIDI implementation, I really like the sounds and partial MIDI is better than no MIDI.

Hoss, how is the Moose working for you? I considered it, but I can't use it to control the hub and the Strymon Mobius simultaneously, so still thinking about controllers.

 

[Hoss Groovealot]

I am happy with the Midi Moose. If I had purchased the Mouse, I would have to "scroll, scroll, select and to change again scroll, scroll select…etc". Banking was a big deal to me and the moose does it quick and easy. 5 channels per bank, scroll up or down to get to the next bank. I may still get the Soleman after it comes out (eventually) so I can name my scenes and have a smaller footprint.

 

[rsmith601]

Hmm. Lots of numbering going on. Can I get a number? Manta, Bass OFD, hub, HH3, probably Nemesis soon. Despite my gripes about MIDI implementation, I really like the sounds and partial MIDI is better than no MIDI.

Hoss, how is the Moose working for you? I considered it, but I can't use it to control the hub and the Strymon Mobius simultaneously, so still thinking about controllers.

Number 209 - Welcome!!

 

[nshuman]

 

[gpx1200]

I have another power supply question ..
so with a dimension reverb on the way and a new oc3 im picking up today my board is getting pretty full and so is my powersuply.
at this point I have 1 100ma port left open on my voodoo labs 4X4 4X soundblox 2 pedals on the 400ma ports and midi mouse, sansamp and oc3 on the 100ma so I can either run my hub from that 100ma port or put a splitter on one of the 400ma ports with one of the soundblox 2 pedals.
so witch is the better option an isolated 100ma port or sharing a 400ma port with one of the soundblox pedals.
________________________________________________________________
never mind I just looked it up myself like I should have before I posted,
for any one else looking for the same info, the hub only needs 40-80ma max so the 100ma port is fine
but I would still like to know if its ok to run the hub on a splitter w/ a soundblox 2 pedal on the 400ma port just in case I decide to squeeze in one more 100ma pedal

 

[adamaarts]

I have another power supply question ..
so with a dimension reverb on the way and a new oc3 im picking up today my board is getting pretty full and so is my powersuply.
at this point I have 1 100ma port left open on my voodoo labs 4X4 4X soundblox 2 pedals on the 400ma ports and midi mouse, sansamp and oc3 on the 100ma so I can either run my hub from that 100ma port or put a splitter on one of the 400ma ports with one of the soundblox 2 pedals.
so witch is the better option an isolated 100ma port or sharing a 400ma port with one of the soundblox pedals.
________________________________________________________________
never mind I just looked it up myself like I should have before I posted,
for any one else looking for the same info, the hub only needs 40-80ma max so the 100ma port is fine
but I would still like to know if its ok to run the hub on a splitter w/ a soundblox 2 pedal on the 400ma port just in case I decide to squeeze in one more 100ma pedal

in theory it should be fine. I had to isolate mine because I was having issues, but it turned out not to be the power situation anyway, but I still separate as much as I can.

The TREX Chameleon is a great power supply for SB2/SA stuff in general. Thanks to SASS for that tip.

 

[nnavarro]

Thanks for sharing, nshuman! I hope you guys enjoyed the stereo imaging. It was achieved completely through the Nemesis. Digital preset; Mix 100%; Feedback 30%; Mod, Rate, and Intensity at 0%. Hard panned left and right outputs.

 

[pbfrog]

Thanks for sharing, nshuman! I hope you guys enjoyed the stereo imaging. It was achieved completely through the Nemesis. Digital preset; Mix 100%; Feedback 30%; Mod, Rate, and Intensity at 0%. Hard panned left and right outputs.

Nice playing! Waiting to see a Nemesis in the wild.

 

[stambroker]

I can't wait to get my hands on a Nemesis... everything I want on a delay! Can anyone comment on the parameters of the software on the Nem? I would love to be able to control the tone of just the delay trails.

 

[nnavarro]

I can't wait to get my hands on a Nemesis... everything I want on a delay! Can anyone comment on the parameters of the software on the Nem? I would love to be able to control the tone of just the delay trails.

I haven't used the software myself, it's still in development, but I'm sure that will be possible.

 

[rsmith601]

I am almost certain this is a control parameter for both the dry and wet signals in the Neuro app. Will check.

 

[rsmith601]

Both high and low cut in the feedback are neuro Parameter. Sometimes it's on the intensity knob for an effect.

 

[stambroker]

Thank you very much for checking!! I figured that would be the case because Source Audio pedals are usually super thorough, but it's good to have that confirmation

 

[gastric]

Doing some Nemesis testing and thought you'd enjoy some teaser sound demos. You can find a simple harmonized one using the pitch shifting Shifter delay here: Source Audio Manta Nemesis Delay sound samples and patches - cgraham.com Soooooo much fun is inside this pedal waiting to get out.

 

[Nic.]

@gastric that is really cool. The delay is shifted up right?

 

[stambroker]

Doing some Nemesis testing and thought you'd enjoy some teaser sound demos. You can find a simple harmonized one using the pitch shifting Shifter delay here: Source Audio Manta Nemesis Delay sound samples and patches - cgraham.com Soooooo much fun is inside this pedal waiting to get out.

Wow, this sounds amazing! Thanks for the demo!

 

[Farrin D]

Doing some Nemesis testing and thought you'd enjoy some teaser sound demos. You can find a simple harmonized one using the pitch shifting Shifter delay here: Source Audio Manta Nemesis Delay sound samples and patches - cgraham.com Soooooo much fun is inside this pedal waiting to get out.

That was fantastic! Great work!

 

[gastric]

@gastric that is really cool. The delay is shifted up right?

Yes, shifted up, there's also down-shifted tones, too. I just played some super simple slow two-note patterns and let the shifted delay fill it all in, which I thought it did perfectly. It'll be interesting to hear what the slap-masters will be able to do with a beat synced shifted delay, it should be super awesome.

 

[enjoi1018]

I have to want a Nemesis more than anyone here... Any of you guys starting to float around your room? Had to just accept it and tie myself down to the floor.

 

[rsmith601]

It is a very cool pedal. Most difficult thing we have done yet....by a mile.