• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join free Log in
    Want zero display ads or expanded classifieds tools? Compare plans.

Source Audio Sorcerers Society (S.A.S.S) Part 3

#4,361
adamaarts said:
Is the POG stereo?

I'm not thinking this would work, at least not optimally. If the POG is stereo then it will send audio down both the Tip and Ring, while the Neuro 'data' travels on the ring. So it would potentially work, but you're missing half of the POG audio in the end.

If the POG is mono, than that won't work.
Click to expand...
I just did some reading in the manual, it will work
the pog is mono but it will be in channel 1, nero data only travels in the ring of channel two hence the TRS cable in channel 2 wich will be my dry signal when the pog2 is on so I can run them threw separate distortions and mix them back into one signal with the aftershock.
I have the 90* trs cable that came with my dual expression pedal so im going to give it a try
 
#4,362
gpx1200 said:
I just did some reading in the manual, it will work
the pog is mono but it will be in channel 1, nero data only travels in the ring of channel two hence the TRS cable in channel 2 wich will be my dry signal when the pog2 is on so I can run them threw separate distortions and mix them back into one signal with the aftershock.
I have the 90* trs cable that came with my dual expression pedal so im going to give it a try
Click to expand...
Does the POG have TRS ins/outs? If it's a typical mono with only TS then the Ring data won't pass through.

It doesn't hurt to try I guess, better than me telling you what to do when I've never done it haha!
 
#4,363
adamaarts said:
Does the POG have TRS ins/outs? If it's a typical mono with only TS then the Ring data won't pass through.

It doesn't hurt to try I guess, better than me telling you what to do when I've never done it haha!
Click to expand...
I'm not trying to run the Neuro signal threw the pog im runing it around it in channel 2 while the pog is in chsnnel 1, its working now but the signal routing changes whenever i bypass one of the pedals
 
#4,366
gpx1200 said:
but can the Gemini remain in mono in/stereo out mode when the pedal is bypassed??
Click to expand...
Yes it can.

Auto detect does work in this case too. If I have one plug in the input 1 jack, and 2 plugs in the out 1 and out 2 jacks, then the pedal will automatically go into mono-in and stereo out mode. Or, you can go into the app and force it into that mode. Up to you.
 
#4,367
rsmith601 said:
Yes it can.

Auto detect does work in this case too. If I have one plug in the input 1 jack, and 2 plugs in the out 1 and out 2 jacks, then the pedal will automatically go into mono-in and stereo out mode. Or, you can go into the app and force it into that mode. Up to you.
Click to expand...
ok maybe it didn't work because I had the neuro cable pluged in to the #2 jack and it was expecting audio signal from that jack as well so it went into stereo in/stereo out mode instead??
 
#4,368
gpx1200 said:
ok maybe it didn't work because I had the neuro cable pluged in to the #2 jack and it was expecting audio signal from that jack as well so it went into stereo in/stereo out mode instead??
Click to expand...
That is correct. Just force it into the mode you want using the app and you are good to go!

Poor old Orby and Offie. On the chopping block!
 
#4,371
I have a product idea/request for source audio that will require no new software or updates to be written at all.
all I want is 2 of your TRS couplers with the ring sections connected by an external 10-12 inch wire to carry the neuro signal around a non SA pedal that's placed in channel 2 in between 2 one series pedals.
in my case this would allow me to create a loop switcher for the non sa pedal using hub presets with different stereo/mono signal routing to switch it in and out while also keeping the neuro signal chain intact but I bet others would find good uses for this kind of "jumper cable"
 
#4,373
Just got my aftershock, and I can't wait to put it through the paces! I'm getting a weird error when trying to use my MIDI Mouse to switch between scenes on the HUB - anyone have any ideas?

I am starting from scratch here scenewise - I used the Hub manager to erase all scenes, updated the firmware on all of my pedals, and I have everything wired like I did when it was working. Am I missing something here?
 
#4,374
stambroker said:
Just got my aftershock, and I can't wait to put it through the paces! I'm getting a weird error when trying to use my MIDI Mouse to switch between scenes on the HUB - anyone have any ideas?

I am starting from scratch here scenewise - I used the Hub manager to erase all scenes, updated the firmware on all of my pedals, and I have everything wired like I did when it was working. Am I missing something here?
Click to expand...
What's the weird error?
 
#4,375
adamaarts said:
What's the weird error?
Click to expand...
Oops, should have been more clear, but I stupidly left that part out while I was frustrated troubleshooting. Even though I'm holding down the button to save pedal configurations to scenes, they're not sticking. I turn on my Nemesis and Dimension and set them up, then save the scene on the Hub while my MIDI Mouse is on Preset 1. If I turn the pedals off, go to Preset 2 on the Mouse, then go back to Preset 1, my scene's settings are not recalled.
 
#4,377
stambroker said:
Oops, should have been more clear, but I stupidly left that part out while I was frustrated troubleshooting. Even though I'm holding down the button to save pedal configurations to scenes, they're not sticking. I turn on my Nemesis and Dimension and set them up, then save the scene on the Hub while my MIDI Mouse is on Preset 1. If I turn the pedals off, go to Preset 2 on the Mouse, then go back to Preset 1, my scene's settings are not recalled.
Click to expand...
Remember that [email protected] is always ready to help if you get stuck.
 
  • Like
Reactions: Bellbass
#4,378
rsmith601 said:
Remember that [email protected] is always ready to help if you get stuck.
Click to expand...

And help they do! Had a weird problem with the Nemesis (only had a wet signal). Surprisingly, it was caused by the fact that my Windows 7 was setup in French (Canada) and that caused the firmware not to upload correctly. Two quick emails later, I was doing all kind of spacey s*** with the Nemesis.

The guys at SA are simply fantastic. They're creating amazing stuff (although quite complicated for a guy like me...) and are backing us up thoughout the process (from conception up to the implementation of the gear on our boards)!

Thanks for everything!!

Now, I'm just waiting for my Aftershock to arrive in Montreal!!!!!!!!!!!!
 
Last edited:
  • Like
Reactions: pbfrog and rsmith601

Latest posts

Top Bottom
Back