• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Spector Models???

NS2 goes back even before Kramer days,but they still make it these days.
(more exotic,more expensive)
It's the U.S.A. 4string p/j model.
NS2A was the Asian made.(Spector pick ups,dot inlays,black hardware,plastic nut)

So pretty much it would be like....
USA
EURO
LEGEND
PERFORMER
something like that.
 
There seems to be quite a bit of confusion about that especially on the used market. I've seen Korean NS-2A's being marketed as Euros with the price tag of a Euro as well. :rollno: Most Euros look almost exactly like the US models("Crown" inlays, active EMG's, gold hardware and brass nut) except for the Rebops which are bolt-ons. Most of them are also stained and have a high gloss finish instead of solid color although I haven't seen many solid colors on newer Spectors anymore. Back in the Kramer days, you could get a white(Sting), red or black model as well as other stained colors. An almost dead giveaway of a US model is the abalone inlays instead of the mother of pearl.
The Legends have the gold or black hardware and are available with a set neck or bolt-on neck. The all have dot inlays as opposed to the Euro and US crown inlays.
There are some models during the SSD and newly acquired Spector era(early to mid 90's) that won't follow some of these guidelines. If you have a specific question about a particular model, don't hesitate to ask.

DGbass70 said:
So pretty much it would be like....
USA
EURO
LEGEND
PERFORMER
something like that.

It's actually something like
USA
EURO
everything else :D
 
If the model name has "CR" or "Euro" in its name, it's a Euro (Czech Republic), so a NS5CRFM is a Euro model. All ReBops are Euro models (more or less the cheaper equivalent to the US bolt-on series), and all Legends, Spectorcores and Performers are Korean models. Anything with a simple model name without too many added letters (NS-5, NS-2J etc) is a USA model.

It gets a little more complicated when you go back to the Kramer or SSD eras, they had some different model names then. All the Kramer-era Spectors were USA-made, and the SSD models were either USA or Czech-made. The Czech SSD models are easy to distinguish as they never had the crown inlays or genuine EMG pickups (although a lot of owners fitted these later). There's a few oddities, such as the BOB Jazz-style bass, that was US-made but kinda rare.
 
There seems to be quite a bit of confusion about that especially on the used market. I've seen Korean NS-2A's being marketed as Euros with the price tag of a Euro as well. :rollno: Most Euros look almost exactly like the US models("Crown" inlays, active EMG's, gold hardware and brass nut) except for the Rebops which are bolt-ons. Most of them are also stained and have a high gloss finish instead of solid color although I haven't seen many solid colors on newer Spectors anymore. Back in the Kramer days, you could get a white(Sting), red or black model as well as other stained colors. An almost dead giveaway of a US model is the abalone inlays instead of the mother of pearl.
The Legends have the gold or black hardware and are available with a set neck or bolt-on neck. The all have dot inlays as opposed to the Euro and US crown inlays.
There are some models during the SSD and newly acquired Spector era(early to mid 90's) that won't follow some of these guidelines. If you have a specific question about a particular model, don't hesitate to ask.



It's actually something like
USA
EURO
everything else :D
^^^^^^^^^

Hahaha,that's right!:D
And you're right i've seen some of that stuff you're talking about.
 
All the Kramer-era Spectors were USA-made...


One small correction if I may. The there were three countries that made Kramer Spectors. Of course we have the US made NS-2s. Kramer then decided to build the inexpensive(but great playing and sounding) NS-2A, B, and C. The first 2A's were made in Japan before they moved operations to Korea. There were very few Japanese built Spectors. The only colors of the overseas models I've ever seen are red, black, white, cherry sunburst and teal stained. If there are other colors, I'd love to see them.