TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
I dont own one... yet. But it's on my wishlist. I played 2 Affinities in particular that were stellar basses; a 2005 in red and a 2018 in burst. Feel, sound, fit, finish, everything- easily hold it's own against an MIM. I have some other gear I want to get first but I would love to have one in the collection!
Good question. I'm not as familiar with the older squiers. Get a good shot of front and back of headstock, maybe someone can ID it. Theres also info/serial lookup here:OK - answer me this:
What's the overall difference between the affinity basses and an older '97 like mine?
Here's the bass as I found it:
View attachment 3486525
That's the problem: Action is too high, mutes at the 15th fret. Can't fix it using a standard setup - either needs fretwork, neck work, or a new neck altogether. If the body is junk plywood, I'm not going to go too much further into the rabbit hole. My initial findings tho - it's not plywood.Good question. I'm not as familiar with the older squiers. Get a good shot of front and back of headstock, maybe someone can ID it. Theres also info/serial lookup here:
Squier Wiki | HomePage
But if she plays good for you, that's all that matters, right?![]()
MIM, that's supposed to be a good one. "Black label" i think they call em. (EDIT yes I know, its NOT a black label) I'd wager a bet a MIM fender neck would be the best fit. But the beautiful thing about fender/squier parts is the specs are so close on any given series, you can make just about anything fit with minimal mods/tweaking.That's the problem: Action is too high, mutes at the 15th fret. Can't fix it using a standard setup - either needs fretwork, neck work, or a new neck altogether. If the body is junk plywood, I'm not going to go too much further into the rabbit hole. My initial findings tho - it's not plywood.
Here's some photos:
View attachment 3486562
View attachment 3486564
View attachment 3486566
Nice !2008 Squier CV Jazz bass. The previous owner upgraded it with ultralight tuners, graphtech saddles and straplocks. I changed out the original pickups for DiMarzio Area Js.
Maybe I should post it over at the tricked-out Squier club?
View attachment 3486683
MIM, that's supposed to be a good one. "Black label" i think they call em...
If you're here - you're like me. You have a 'cheap' bass.
Send your pics - I have many questions about my Jazz bass and maybe you all do about yours as well.
Thanks!
Many of the "Black Label" Fenders of the 90's were the Fender "Squier Series", adding to the confusion that they're also Squiers.MIM, that's supposed to be a good one. "Black label" i think they call em. I'd wager a bet a MIM fender neck would be the best fit. But the beautiful thing about fender/squier parts is the specs are so close on any given series, you can make just about anything fit with minimal mods/tweaking.
Theres a squier mod club, stop in, maybe someone has experience with that model:
Tricked Out Squier Club Part 3
Good luck!