• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Squier Classic Vibe Club

Status
Not open for further replies.
i'm not in the club (yet), but i am a happy new owner (re: http://www.talkbass.com/forum/showthread.php?t=653764&highlight=squier) of one and it continues to amaze me. last night i was able to spend a solid hour with it. still unable to crank it (apartment/neighbors), so was limited to low volume or headphones. of course its difficult to critique them fairly under those conditions, but i didn't hear anything to write home about coming outta the stock pickups. since they go for <$30 on ebay, so i'm sure they can be improved upon, in any case. i'm likely to spring for a nordy np4 in the very near future.

on another note, i yanked the pickguard yesterday to have a look under the hood and, to my amazement, it was clean enuff to eat off of. i was expecting the usual bits of this/that, sawdust and polish, etc from the factory as i have been so accustomed to finding on virtually every MIM fender i've ever owned. not so, in this case. spotless and flawless. was also surprised to find conductive/shielding paint in the control cavity. also very nicely applied. at this point, i may splurge for a nice (G&G) case too...
 
What grit and how long?

I used a 320 grit sponge and lightly sanded away the sticky gloss of the finish. I used a slightly damp paper towel every couple of minutes to take off any excess. The whole process did not take more than 30 minutes (I took my time). There is probably a better way but it worked good enough for me and the difference in playability is dramatic.
 
dirnt50s.jpg


My '50s CV next to my Dirnt Sig. P
 
I've been subscribed to this thread for a while, but never become a member. Here's my 60's Jazz. I've upgraded the electronics to Bourns pots (push/pull series/parallel), Sprague cap, switchcraft, silver coated wire. I also shielded with copper foil. It's killer now! :)

PIC-0119.gif
 
Still stock (except for strings), but I have a Nordy NP4 on order from bestbassgear. Impossible to capture the true color indoors without proper lighting. It's actually Fiesta Red:

CV_01.jpg


CV_04.jpg
 
I noticed the biggest difference when I changed the capacitor. I'm thinking of going with a different rated one. Maybe something a bit higher. Mine sounds quite a bit darker with the new cap than it did stock.

I have since sold mine but i perfered a orange drop cap in mine .47 I really liked that with stock pickups, but the high output pickups worked against the tone i was wanting , i had seymour duncans in mine.
 
I have since sold mine but i perfered a orange drop cap in mine .47 I really liked that with stock pickups, but the high output pickups worked against the tone i was wanting , i had seymour duncans in mine.

Well, I changed my cap when I changed my pickups. Probably should have done one, then the other. But I changed mine to a .47 and I think it took a lot of the highs out of the tone.
 
Status
Not open for further replies.

Latest posts