Stagg headstock logo

[heave1]

I am looking at a Stagg 4 string bass that's a MM Stingray knock-off. The oval inset logo on the headstock is missing. Anyone know if it's possible to find a replacement logo? It looks like brass but I'm sure it's plastic.

 

[heave1]

I hope this is the right forum for this question.

 

[Bryan R. Tyler]

This is the proper forum. Staggs are extremely low budget basses- the lack of a logo insert won't change the value any if that's what you're concerned about. You could make your own.

 

[B-Mac]

I am looking at a Stagg 4 string bass that's a MM Stingray knock-off. The oval inset logo on the headstock is missing. Anyone know if it's possible to find a replacement logo? It looks like brass but I'm sure it's plastic.

???????????????????????????????

 

[abarson]

Maybe you're referring to the round string tree that holds down the D and G strings?

 

[heave1]

This is the logo. This appears to be a decal, but the logo on the bass is inset into the headstock.


https://i.pinimg.com/736x/0b/13/95/0b13959dabc313625ac0b873a66dc6eb.jpg

 

[Reedt2000]

This is the proper forum. Staggs are extremely low budget basses- the lack of a logo insert won't change the value any if that's what you're concerned about. You could make your own.

Agreed, it makes no difference that it doesn't say Stagg on it. Chances are that bass come out of its factory brand in multiple ways. Even though they're a budget brand I've seen Stagg instruments that play well. If the one you're looking at is decent (& cheap) grab it and don't worry about a logo (or as @Bryan R. Tyler suggests make your own).

 

[Reedt2000]

Found a site selling Stagg stickers

Invalid Link Removed

 

[heave1]

The problem is it's not a decal. It's an inset about 1/8" into the headstock. A decal wouldn't cover the indention. It's more like a button or badge.

 

[kodiakblair]

@heave1
You could contact Stagg direct. TBH I doubt they will have spares, most times their products will ship straight from factories to distributors. No harm in asking though

 

[jd56hawk]

The problem is it's not a decal. It's an inset about 1/8" into the headstock. A decal wouldn't cover the indention. It's more like a button or badge.

Like this, right?

Some basses used badges instead of decals, of course.


You just might have to get one custom made or make your own.
Need ideas for making 3D headstock logo, Warmoth build content

Guitar Amplifier Custom 3D Plastic Plate Amp Name Face Plate | eBay

Need ideas for making 3D headstock logo, Warmoth build content

 

[heave1]

That's exactly what I need. Thanks a lot.

 

[heave1]

@heave1
You could contact Stagg direct. TBH I doubt they will have spares, most times their products will ship straight from factories to distributors. No harm in asking though

Thanks, I will try that.