• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Stop Me...

J Posega

Cat Dad and Dingwall Enthusiast
Inactive
Suspended
Jul 16, 2005
11,796
17,172
38
Portland, OR
...from buying a Schroeder Mini12 Light 3-space Airhead.

At 22 pounds, it'll still weigh in at about 40-50 pounds depending on what poweramp I settle on. That also gives me room for my power conditioner.

Now, the 12+ is about $150 dollars more. I'm going to run this cab with a poweramp and PODxt Live. I find myself leaving the tweeter oin my Avatar 2x12" pretty much off, so I don't think this one would get any use.

The 12+ also says it is bottom ported or sealed. Is this true for the regular 12? If so, which would I want? I'm going to use this cab solo, and I'll be utilizing a B/C#/D string, depending on the bass and band.

I'll be ordering it as an 8-ohm, that way I can add more cabs later, if I can ever afford them. This setup will be used for electric only, live, practice and recording. I'm e-mailing Schroeder as we speak to inquire about the port as well as airhead.

Thanks in advance.
 
SERiously ask yourself if you'd get tired of carrying 50 Lbs in one trip everywhere. Your back may be good now, but moving stuff gets old. consider Mini+ without airhead or put casters on the airhead?

Just a tip from a player with a bad back and I'M NOT EVEN 40!!!:bawl: 22Lbs would be sweet for a cab, 20-30 for a rack.
 
As I mentioned, I'll be installing casters and a pull out handle so I can wheel it around. I've been on the smaller/lighter amp stint since I found out I had a hernia, which I had repaired last week. Maybe I will keep 'em seperate,
 
Mcrelly said:
Just a tip from a player with a bad back and I'M NOT EVEN 40!!!:bawl: 22Lbs would be sweet for a cab, 20-30 for a rack.

+1, don't get the airhead if you're going to stuff 30 lbs of amp in it... it defeats the purpose of the very light cab... keep it modular with power amp and preamp in a seperate rack case. Just my 2cents.