• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Strap locks

I think it's not really a matter of Loctite not working, it's more like you shouldn't have to go to that extra effort in order to keep the lock from falling apart. Some people might think it a poorly designed system if it required such extra measures in order for it to work properly.
i would be inclined to agree with those people, but i would still use the loc-tite if i didn't want the instrument to fall off.
 
My Fender had Schallers when I bought it. The top one came loose had to do the toothpick thing to make the screw tight again and I have to keep an eye on it all the time. My Rick won't take Schallers because Rickenbacker uses a machine screw that is larger than Fender's wood screw. So I am trying a Lock-It strap. I had a problem with thefirst one but they were very nice and sent me a new one.It seems to work good but I wouldn't do no Van Halen whirlies with it.
 
All of my basses and electric guitars have Schaller Strap Locks. It's the first thing I do to a new/new to me instrument, unless it already has them installed. In over 26 years of playing, I've never had one fail.

Cheers!
:bassist::bassist::bassist:
 
My Fender had Schallers when I bought it. The top one came loose had to do the toothpick thing to make the screw tight again and I have to keep an eye on it all the time. My Rick won't take Schallers because Rickenbacker uses a machine screw that is larger than Fender's wood screw. So I am trying a Lock-It strap. I had a problem with thefirst one but they were very nice and sent me a new one.It seems to work good but I wouldn't do no Van Halen whirlies with it.

You can actually buy strap pegs from Rickenbacker that will work with the Schaller Strap Locks. I have that setup on my '76 4001.

BOLT STRAP LOCK CHROME

Cheers!
:bassist::bassist::bassist:
 
i've thought about this a little bit.

if the schallers used a clip like the dunlops, the mechanism couldn't be tightened against the strap, leaving it free to turn, which would allow the "cup" to face downwards, a recipe for a fall. (the dunlop is circular, so orientation doesn't matter; its drawback is that it sets the strap way up off the body.)

there would need to be a way of cranking a nut down tight, then locking that in place with a c-clip or a cotter pin or something.
 
grolschstraplocks.jpg

+1

Also, it's kinda badass.
 
so the two halves screw on to each other like a schaller (with only a few turns so they can unscrew and fall off)

the button part has only a short length of wood screw thread (so it's not all that strongly mounted into the wood)

and the button won't hold a regular strap (if you mis-place your strap at the gig, you can't borrow another one and get to play sitting down)?

great!