here's an image of a SCPB route ... notice the non-rectangular shape and lack of ears that a J-bass style single-coil pickup has
![]()
and a poor quality image showing the detail of where a SCPB pickup leads are located. if you mod your bass to utilize one of these, you may also need to drill a new wire tunnel into the control cavity. NOTE: Be really careful with those esposed wire leads - there are two miniscule windings that are exposed on the outside edge of the pickup ... if either of these wires touch your grounded cavity the pickup will ground out and make no sound, and/or should you accidentally scrape and break one of these leads you will have a not so pleasant job of repairing the winding leads so your pickup will again make sound
![]()
yes, the sound is a single-coil type sound somewhat like a J-bass pickup ... but it is also a completely different winding specification with it's own unique sound to it.
all the best,
R
hi thanks for your kind help...my question wasn't "tecnical" (i already knew that i would have had to make a bigger hole for the jazzbass pickup), but i wanted to know if it could be a good idea sound-wise, and if anybody of you did already try that...
thanks anyway!