Sounds good, answering questions is something I do
Also before I forget, I got some current draw numbers, which is something I know people ask about a lot. These were taken on a 9V supply:
Single tube designs (Particle Accelerator, Slampegg Bee Pre, London Underground, Lab Rat) will pull around 650mA as it's warming up, and about 470mA steady-state when it's done warming up. You MIGHT be able to get them to run on a 500mA supply, but it's safer to go at least 600mA.
Double tube designs (Dr. Wattson, Sunnday Drive, Black Eye) will try to pull around 2000mA during warm-up. This does not mean you need a 2000mA supply, but a lower output supply will take longer to warm up. The pedal should drop down to about 770mA steady-state when it's done warming up. I would recommend at least 1000mA supply.
When in doubt just give it as much power as you can, I recommend a 1Spot which will do 1700mA. I've thought about developing a brick style supply for use with these so you don't need separate supplies for everything, but I haven't really committed to it for sure.