• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

The Sushi Box FX Secret Society

On mine all setting flat, with the gain around 9 o clock and master around 3 o’clock (which gives a balanced level to bypassed and mostly clean tone) has a pretty dark sound. I have to crank the treble up pretty high to bring back those highs. This is also going through my genzler BA10-2 which is like a microscope on high mids, but curious if that’s normal?
Also make sure Ultra Lo is off. Different models of the Slampegg have off as either up or down. You want the louder position.
 
I just scored a Robot Butterfly from the classifieds for my smaller board. The contrast between it and G-Butterfly is dramatic...the latter has much more high end clarity.......it sounds "glassier" to me.

Sushi Box FX
Are the 8 assigned mod FX on RB located at the same positions as on G-Butterfly? It sounds that way to me (and the processor is the same), although I'm not too sure about the chorus? Sorry to bother with this but I do not see the info in the Box archives under RB.
Thx
 
Getting a new 12AT7 tube tomorrow for the Red Channel for my Dreamcatcher. Which side should I replace to affect only the red channel?

image.jpg


And when I replace, should I wear gloves? Don't know if it's similar to car headlights that will overheat from oils on your fingers.

Also, will I need to adjust the blue pot for the red channel? Assume that is tube bias or something else I don't understand.
 
Getting a new 12AT7 tube tomorrow for the Red Channel for my Dreamcatcher. Which side should I replace to affect only the red channel?

View attachment 4991482

And when I replace, should I wear gloves? Don't know if it's similar to car headlights that will overheat from oils on your fingers.

Also, will I need to adjust the blue pot for the red channel? Assume that is tube bias or something else I don't understand.
The tube on the right in your picture is the one that only affects red channel.

You don't need to wear gloves, you can change tubes with bare hands. Make sure power is unplugged and the tube has cooled down, but otherwise pretty easy and straightforward.

The blue trimpot is the master attenuation and it affects both channels. You only need to adjust it if the pedal doesn't get loud enough (turn the pot clockwise) or is too loud (turn it counterclockwise). Preamp tubes use a fixed bias, no adjustments will ever be necessary.
 
Getting a new 12AT7 tube tomorrow for the Red Channel for my Dreamcatcher.

My DC is in transit. I am eager to hear your impressions after swapping the red channel tube for an AT7. I'm not
into heavy OD and want the DC mainly to have available 2 channels........ 1 "almost" clean with a bit of bass boost, and the other channel with moderate OD and both bass and treble boosted.
 
  • Like
Reactions: CH Design
My DC is in transit. I am eager to hear your impressions after swapping the red channel tube for an AT7. I'm not
into heavy OD and want the DC mainly to have available 2 channels........ 1 "almost" clean with a bit of bass boost, and the other channel with moderate OD and both bass and treble boosted.

I'll report back my findings, but that's pretty much what I'm going for too.
 
  • Like
Reactions: lomo
Anybody have a UA and Elementary? Would you be able to describe their similarities and differences?

Bonus points if you also have a Lab Rat. I’m wondering if that high mid peak is still present or if it disappeared when the Baxandall EQ was replaced the traditional tone control.
 
Last edited:
Anybody have a UA and Elementary? Would you be able to describe their similarities and differences?

Bonus points if you also have a Lab Rat. I’m wondering if that high mid peak is still present or if it disappeared when the Baxandall EQ was replaced the traditional tone control.
I don't have an answer to your question (though I obviously do own all 3 if nobody else does), but this may be a good time to let people know that Lab Rat hasn't had any orders in a few months and may be going away soon.

I think that's the only one actively at risk right now, but others that have had dwindling numbers and are being monitored include Dr. Wattson (between Elementary and Detective it's starting to feel superfluous), Glass Butterfly, and Echosaurus Valve (tubes and digital together are neat, but both of these are admittedly things I wanted for myself and not so much things customers have been asking for).

I do have a couple things I'm excited about working in, so it's getting to be a good time to thin out the lineup in favor of new sexiness. Things I'm working on, more or less in order:
  • Venus X - working out the final kinks with @TonyP- hopefully have a presentable product soon
  • Furthermore - pretty much as soon as Venus X is ready this will be getting the bulk of my R&D attention
  • Slampegg 6SL7 ("Grand Slampegg" is a pretty sweet name) - I'm falling in love with the sound. SO SMOOTH.
  • Euclid - might be super cool, might be super stupid, don't know. Had the idea yesterday, designed it today, maybe have a prototype in a couple weeks.
  • Greenhouse - still haven't forgotten about that one, just need to revisit when I have more time.
  • SBVT II - I pulled it back out and plugged in the other day, it sounds good. I just want more external opinions before moving forward. May need to enlist more testers. @FronTowardEnemy ?
 
Well dang, and I was thinking of putting one right at the beginning of my chain. I don’t know the best way to tie it in later on my particular board so the beginning seemed to make the most sense. Maybe not…
IME the MORE gives better results with other devices pushing it, putting it first the effect is not as profound.
 
  • Like
Reactions: _Tay_ and kevk
[QUOTE="Sushi Box FX
  • Furthermore - pretty much as soon as Venus X is ready this will be getting the bulk of my R&D attention
  • Slampegg 6SL7 ("Grand Slampegg" is a pretty sweet name) - I'm falling in love with the sound. SO SMOOTH.
  • May need to enlist more testers.
[/QUOTE]

you can use me as well. you have my address

i think furthermore could benefit from a 6SL7 as well. it’s the best bass tube after all.
 
  • Like
Reactions: mrperkolator