• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Thunderbird Club

Been a while since I owned a Gibson, but this 2015 Les Paul 100 Studio was in dire need of help.
View attachment 5261953
Somebody installed these lights and routing out part of the body to do so.
View attachment 5261954 Yeah, given the size of that backplate, I was under the impression that there was some elaborate circiutry hiding there. More about that later...

View attachment 5261955 Probably the most hated spec of those 2015 Les Pauls: the Robot tuners. The music shop I got the guitar from said that they would like to keep those, since they could use them as spares. I happily took them off right there and then in the shop.

So, about that circuitry behind that big hardboard plate...
View attachment 5261956
CHRISTMAS LIGHTS, I don't know if it ever worked, since there was no connecting to be found that could power them, let alone a battery of some sort. But they were meant to make the instrument light up like a Christmas tree, for real.

Well, I decided to get the lights out of there.
View attachment 5261971 Which I did by using a wooden dowel and tapping that with a mallet. So you can say that I punched its lights out. :)

Those carvings you see which expose the maple top is the body's weight relief.

I put it back together as it is now, although I DO intend to make it more presentable.
View attachment 5261973
That's hilarious! You could easily get some battery powered LEDs in there.
 
Gig last night(Elks Club). Relatively small stage. Used the Epi Embassy. Gig tonight(VFW, Hobe Sound). Plenty of room(well, not compared to "The Nasty Habits" stages, but spacious for us). Thunderbird time.:hyper:
IMG_0211.jpg
 
Casting aside your worries.... Has anyone used the Earnie Ball Pop Out Casters on one of their cabinets ?
What are your recommendations ?
I put them on an Ampeg B-100R and the plates were a perfect match. It was missing the casters but had the plates. The EB casters' legs are smaller in diameter than the ones Ampeg used. Don't know if that helps at all. They are nice and reasonably priced.
 
What would be nice is a set of pop out casters with larger, like three inch polyurethane wheels. Something that will do good on rough asphalt parking lots, or hard pack dirt.

Agree - the bigger the wheels the better. Best $100 spent - a friend welded the aluminum fence so things don't slide off. This is an old pic - lots more stickers now!

upload_2023-11-25_9-4-43.jpeg
upload_2023-11-25_9-5-17.jpeg
 
Last edited: