Nope, I don’t actually have any idea where they are, plus it’s enough driving going from San Mateo to Petaluma, (to get my ‘99 Ebony ‘bird that just does NOT want to set up well, PLEK’ed and all, but it’s a good as I guess it’s gonna get. It’ll just be one of my ‘birds with higher than I like action) then back to San Rafael to get my V4BH and 6550 modded ‘73 V2 which both now have new match power tube sets and the best of all of the vintage pre-amp tubes I have installed in them.
My upcoming setup for use in the Bad Lemon rehearsal space will be to use the V4BH with SVT212AV and the V2 with an SVT 48HE (4x8”) coming out of a ABY snd creatively using two HPF’s set different to each head. Keeping some sub 40hz lows in the V4BH/212, but pulling 50 or 60hz (or more) completely out of the V2/4x8, and otherwise using the amp tone controls to dial in a good mix between the two. I had my tech confirm if the amps were in phase, and they are not, but my ABY box has phase inversion switch on the B out. My tech thinks the better way is to use a speaker cable that is reversed on one end, and using it at one of the amp to speaker connections. This actually seems to me as well to be the best way, but I’ll be trying both.
Hoping this will all be enough as far as power to keep up in our loud room.
Right now I’m using my SVT5Pro (all SS, no tubes at all), into these two cabinets, bi-amped and crossed over, and the spec states I’m getting 340w continuous from amp A and 340w from amp B to each cabinet. I have no idea how much of that I’m actually using to sound good, but I will say, it sounded pretty good as of Thursday night.
I’m only doing this cuz I have all this stuff and want to use it. This rig will never be played out…. Pretty much will alway use the Orange AD200/115/(and sometimes)210 or the Orange TB500 and 2x 112’s for gigs.