• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Thunderbird Club

Time to take out the Defibrillator! :)

I have a better one than the regular electro-convulsive-therapy: Dip him in water while administering the shock treatment - Just one caveat though; remember to wear thick rubber gloves when using the defib. or you might experience a slight tingling sensation yourself...
 
I have a better one than the regular electro-convulsive-therapy: Dip him in water while administering the shock treatment - Just one caveat though; remember to wear thick rubber gloves when using the defib. or you might experience a slight tingling sensation yourself...
Why not just waterboard and ECT at the same time?
 
Nobody feels intimidated by a defibrillator. Until you have a paddle on each temple.

Car battery and jumper cables seem a lot more intimidating.... we should figure out a way to combine the two for the next initiation!

Ok, things are escalating to a very dangerous level. Michael is the only one qualified that can administer the procedure.
 
Thanks all (@kat888 @JIO @GBassNorth) here is the bass I have been posting about:

IMG_20180307_211503044_zpsyvus02x1.jpg
IMG_20180307_211358057_zpsgqeabjmz.jpg
IMG_20180307_211516345_zpskpgefota.jpg


Thanks all for your help. Sounds really good. The pickups are the $79.00 ebay ones from Korea. They are not Lollar's (what I have in my T-Bird) but the first go around bodes very well. The pickup placement gives it more of a P-Bass-on-Angel-Dust vibe.... Very in your face.:thumbsup:

This is a stock 2011 Fender BlackTop Precision. I swapped in a Jazz neck (MIM) w/ Hipshot tuners. The pick ups dropped right in. No routing etc. I used some olld dense foam packing material to make spacers under the pickups. The rings are glued on. I cut the heads off some screws and glued them on for effect. I had to shave about 2mm of material from the pickguard so the neck pick up would fit. I used a utility knife and a file to get the job done.

This is what the fit Looked liked:

IMG_20180307_211541642_zpsdzqdyjq8.jpg


IMG_20180307_123744415_HDR_zpsdqyf4j4o.jpg


Total Cost: $705.00- $170 (sold the Precision neck on TB)= $535.00
 
Last edited:
Car battery and jumper cables seem a lot more intimidating.... we should figure out a way to combine the two for the next initiation!

Just got one of these:

jumpstarter-gb40-boost.jpg


Nice and portable for the initiation, and should be good for resetting the "ticker" a couple of times! :)
 
Thanks all (@kat888 @JIO @GBassNorth) here is the bass I have been posting about:

View attachment 2942396 View attachment 2942397 View attachment 2942398

Thanks all for your help. Sounds really good. The pickups are the $79.00 ebay ones from Korea. They are not Lollar's (what I have in my T-Bird) but the first go around bodes very well. The pickup placement gives it more of a P-Bass-on-Angel-Dust vibe.... Very in your face.:thumbsup:

This is a stock 2011 Fender BlackTop Precision. I swapped in a Jazz neck (MIM) w/ Hipshot tuners. The pick ups dropped right in. No routing etc. I used some olld dense foam packing material to make spacers under the pickups. The rings are glued on. I cut the heads off some screws and glued them on for effect. I had to shave about 2mm of material from the pickguard so the neck pick up would fit. I used a utility knife and a file to get the job done.

This is what the fit Looked liked:

View attachment 2942399

View attachment 2942400

Total Cost: $705.00

I like that neck pup positioning.