Like these?: Frets On The Net Page 5.
But I get you - at those prices I could part out my T-40 for 3-4 grand!
As an eBay Associate, TalkBass may earn a commission from qualifying purchases.
Enjoy the benefits of a premium membership!
Upgrade Account
-
TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
U.S. Peavey Club
- Thread starter Soundchaser11460
- Start date
-
- Tags
- club
Like these?: Frets On The Net Page 5.
But I get you - at those prices I could part out my T-40 for 3-4 grand!
There are plenty of three string retainers that are the bar (rod) type similar to what Peavey used for around $8.00
If you don't "gotta have" the triangle ones, there are a number of options that actually hold down three strings, which is better really.
Truss rod cover can be made out of a piece of plastic cut to shape and then bent to the correct curve with a heat gun and a little bendy-bendy until it's right.
If you don't "gotta have" the triangle ones, there are a number of options that actually hold down three strings, which is better really.
Truss rod cover can be made out of a piece of plastic cut to shape and then bent to the correct curve with a heat gun and a little bendy-bendy until it's right.
I think that guy is a habitual gouger. Uses a few different user accounts.
I got a bass triangle tree for $13 shipped two months ago off of ebay.
I got a bass triangle tree for $13 shipped two months ago off of ebay.
Yes, like those ! $16 is still WAY better than $99.
Yes, exactly ! All you need is ONE truss rod cover to make copies. I traced the original and bent it after heating it up with a lighter. If you don't want to see heat marks, just heat it up from the side that you call the back so that is not seen.
In good Aussie-speak...That guy's a bloody crook!
As an eBay Associate, TalkBass may earn a commission from qualifying purchases.
I can just just hear you saying that, too !!! Everyone loves an Australian accent.
Have you seen the episode where they get bullied by Aussies? Hilarious, like every other episode.
I must claim ignorance. I have no idea who that is...Not Bret and Jemaine.
Last edited:
As has already been discussed, truss rod covers are not difficult to reproduce yourself.
The triangle string tree, different story. The typical home printer does not do metal printing. I do have a good friend who works in industrial 3D printing and would likely be able to take on a side project for the trees. I will talk to him later this evening and see what he thinks.
The triangle string tree, different story. The typical home printer does not do metal printing. I do have a good friend who works in industrial 3D printing and would likely be able to take on a side project for the trees. I will talk to him later this evening and see what he thinks.
Flight of the Conchords is comedy gold. Their songs are incredibly funny and well done, too. I used to cover "The Most Beautiful Girl (In The Room)."
I know they aren’t that common, but does anyone have a bolt-on 5-string USA Cirrus they’d be interested in selling?
Thanks
Thanks
Last edited:
I just put my Gen 2 Foundation 5 with matching headstock up for sale in the classified ads.
For Sale - Peavey Generation 2 Foundation 5 w/matching Headstock
For Sale - Peavey Generation 2 Foundation 5 w/matching Headstock
the audere is a great preamp
I have it in my atelier z
with it in the GV
It does sound very meaty and edgy yet
But still prefer the Emg to my ears
I actually toasted my Emg preamp doing somthing dumb yet again… let’s not flame me or go there lol
I do find a delay in the bass sound when I plug it in before it settles
I was told to add a resistor to the DC coupling cap of either 50K and if it changed the tone
up it to 250K if that makes sense
Not liking the fact I gotta use resistors personally but it’s still a great sounding preamp
pretty much sounds like this but my frequency is lower
I have it in my atelier z
with it in the GV
It does sound very meaty and edgy yet
But still prefer the Emg to my ears
I actually toasted my Emg preamp doing somthing dumb yet again… let’s not flame me or go there lol
I do find a delay in the bass sound when I plug it in before it settles
I was told to add a resistor to the DC coupling cap of either 50K and if it changed the tone
up it to 250K if that makes sense
Not liking the fact I gotta use resistors personally but it’s still a great sounding preamp
pretty much sounds like this but my frequency is lower
