• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Ugh!!!! and on my #1 too

probably not going to move if you just leave it.

I would consider having the area repaired - it would probably not be too difficult to have the area drilled out, a circular piece of wood fitted, and a new tuner hole drilled. depends on weather or not it moves, and how much you care - to get it to look seamless may be expensive, to get it stable but noticeable will be easy.
 
I really don't understand how that happened. Something would have had to push OUT from the hole to break off the top layer light that. I wonder if it was already broken, perhaps from previous bushing removal, and the fall knocked the pieces out.
 
Whatever the reason it needs to be fixed. You live in Brooklyn take the instrument to David Gage manhattan. He mostly repair and restores upright basses and very well known in his craft. But there is a guy who repairs fretted instruments . His name is Manny Salvador who works in his (Davis Gage) shop.
 
I have never seen damage of that exact type before.

I have. Not only seen it but fixed it. Fix is not bad but takes some care. You need to remove bushing as already noted very carefully saving all splnters you can find. The bushings are usually inserted with some tension which may be why a little trauma caused the damage. Even worse it is best to PRESS the bushing out slowly (instructions can be found on net) so that you don't damage the wood even more by pounding. (trust me on this one! :-( Then having removed the bushing you need to put all the splinters back Like a jigsaw puzzle with glue to hold them in place. When glue is set, press the bushing back in and done.

Note that this boo boo is pretty mild! I had one where the bushing tension not only split out some splinters but ALSO split the headstock at the tuner hole! That is far worse because you need to force the split apart to get glue into in without causing further damage and then clamp it all back together and then after that deal with the splinters. But the good news was both fixes came out great without needing any headstock refinish or the like.
 
  • Like
Reactions: Cliff Colton