• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

What's the best electricity for metal?

500 kV DC 3 phase.
Shock.gif
 
Last edited:
The Monster Cable for bass thread made me think--what kind of electrons do I want circulating around my rig for the best tone? Can my favorite local electric monopoly provide me with boutique electricity? I mean, think about it--you don't spend $250,000 on an Italian sports car and put discount shopping club gas in it. Should I look into something in a higher voltage for metal? Maybe something coal-fired for country staples by Loretta Lynn? What about those peaceful acoustic tunes that you play sitting on the banks of a river--hydro power? Will solar power bring out the mids better on Jack Bruce's lines in "Sunshine of Your Love"?

I think I've been missing out on the secret to great tone.

Voltage at the outlet is somewhat limited 115( American house current) or 220 (Europe). Amperage is limited to the the amount the circut will handle before a fuse blows or circuit breaker trips (one of the biggest downers on a gig). If you do the math between amps and volts, that are both limited, you will end up with how many watts you are using.

Great tone is the sum total of your gear and EQ. Further, your gear is designed to operate with specific current. I wouldn't advise going with current other that what your gear is designed to use.
 
Only use electrons from renewable resources.

Like dumb TB posts.

We could power the planet on this thread alone!

Fellow TBer's,

As a journeyman electrician it is my duty to inform you all that the best electricity for metal can only be installed by a qualified electrician.

Please check your local trades authority for contractor recommendations.

This thread is now officially a job creator!

Voltage at the outlet is somewhat limited 115( American house current) or 220 (Europe). Amperage is limited to the the amount the circut will handle before a fuse blows or circuit breaker trips (one of the biggest downers on a gig). If you do the math between amps and volts, that are both limited, you will end up with how many watts you are using.

Great tone is the sum total of your gear and EQ. Further, your gear is designed to operate with specific current. I wouldn't advise going with current other that what your gear is designed to use.

What if we used two outlets?
 
European 240 Volt, 50Hz power is absolutely best for metal. Besides more voltage (which makes it more lethal should you get a hold of the wrong wire), the reduced frequency necessitates a larger, heavier transformer in your amplifier (this is actually true) Having hefted that before the set, that helps you get the right "snarl" on your face for the set. Why are there a lot of good German metal bands? Duh!

Oh, and the power plant should be nuclear (with an umlaut over the U).