• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Which solder spool for guitar repair

Solution
Ah ... the cat's pajamas!

Don't be afraid to buy BIG. Price varies WIDELY. It will last you the rest of your life (even if you don't succumb to lead poisoning)
I have used up my little stewmac trial coil and want to purchase a supply for my workshop
this is just for working on your own stuff, not a production/repair environment?

this is all you need


1776463298605.png


don't bother with 60/40, 63/37 is what you actually want

if you're an ace expert soldering guy with really good gear then you might try wrestling with lead-free, otherwise for occasional home use forget it
 
As an Amazon Associate, TalkBass may receive commissions from qualifying purchases made via links on this site.
  • Like
Reactions: 1String
Upvote 0
Ah ... the cat's pajamas!

Don't be afraid to buy BIG. Price varies WIDELY. It will last you the rest of your life (even if you don't succumb to lead poisoning)
I bought a 1 lb spool of 0.8mm Kester 44 ten years ago and have still barely put a dent in it.

Then again it cost $25 at the time, it's over twice that now and with an escalated likelihood that whatever's shipped will be counterfeit.

If OP thinks they'll only be soldering things a couple times a year, a 1 oz tube will be perfectly fine. The cost per ounce is a whole lot higher, but the cost per lifetime supply is a whole lot lower. :smug:
 
Upvote 0