Workingman's 10 Schematic

[Tom Schupbach]

Does anyone have a schematic for the WM10 that uses transistors in the power section instead of the later version with the chip amp?
Thanks!
Tom

 

[seamonkey]

Fender does: SWR Amp Schematics

 

[Tom Schupbach]

Fender does: SWR Amp Schematics

Couldn't find the schematic for the amp I have, the ones I did find were the chip amp (later) versions, but thanks for the link!

 

[Tom Schupbach]

The board I have is marked "WKG10 #1 Bottom Rev D" and on the component side is silk screened "WORKING MAN'S 10", "MANUFACTURED BY SWR", "WKG #1 SILK REV D".

Hope that someone might have this info, please.

 

[beans-on-toast]

Other than what Fender publishes, the remaining schematics are quite rare. The WM12 set has the transistor out. If they are similar enough, it might help to use that as a reference.

I’ve had good luck in obtaining schematics when I contacted Fender to request schematics that aren’t available on their web site. Worth a shot.

 

[Passinwind]

The board I have is marked "WKG10 #1 Bottom Rev D" and on the component side is silk screened "WORKING MAN'S 10", "MANUFACTURED BY SWR", "WKG #1 SILK REV D".

Hope that someone might have this info, please.

Try posting your request on the [Invalid or Expired Link Removed] .

 

[Tom Schupbach]

Thanks, I will!
Tom