• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Worship Bass Pedalboards

Oh yeah…the IMA presets. I forgot about them. I'll look into that.

If you're interested, I would grab either the IMA presets or maybe some from David Curran? (I havent tried his) just to get started while you get familiar with the helix platform.

Since you have a noble already I'd just use that and move down to a nano+ . To me, I still have a small board that sounds killer.
 
  • Like
Reactions: NickyBass
I decided to go that route (stomp) instead of swap pedals out to find what I like.

I didn't have experience with different effects and didn't know what I would use where and when but the stomp made it feasible for me. I figured I could try different effects without spending a ton of money and it turns out i am really happy with it. It's also cool that line 6 continues to put out updates with new stuff for them, so it's like the gift that keeps on giving.

I don't have a desire to try other pedals. The stomp will get you ~ 90% "there" and none will be the wiser.

I was hesitant… but now that I've had it for 7-8 months I think? I never want to be without it. If it broke, I'd buy another immediately.
 
Last edited:
  • Like
Reactions: NickyBass
Yeah, 90% there is all I need. No one noticed in a venue. The Stomp and presets have allowed me to get my gear down to a Nano+ with a GLXD+, the Stomp and a Radial Pro just in case. All powered with a DC7 underneath.

The Radial Pro is fine. I'm debating a JDI to take it up a notch, and even a Noble to go really overboard.
 
Something I've wondered about an always on like the Noble. Does it have to stay on the board? Couldn't you just put it by or on the amp?

I figure power supply could be a concern, but in my case, my Furman with clean power is back by my amp and I could just plug in there.
At the church we were a part of before this one, when they went silent stage, they just left a SansAmp on stage at the bass station. Later a REDDI took its place (and I fell in love).
 
I decided to go that route (stomp) instead of swap pedals out to find what I like.

I didn't have experience with different effects and didn't know what I would use where and when but the stomp made it feasible for me. I figured I could try different effects without spending a ton of money and it turns out i am really happy with it. It's also cool that line 6 continues to put out updates with new stuff for them, so it's like the gift that keeps on giving.

I don't have a desire to try other pedals. The stomp will get you ~ 90% "there" and none will be the wiser.

I was hesitant… but now that I've had it for 7-8 months I think? I never want to be without it. If it broke, I'd buy another immediately.
Trying effects is free at music stores. :D
 
I love reverb on bass &; use it all the time! I just put it after my drives & compression in a parallel loop so I still get my foundational tone & retain my dynamics.
I TOO USE REVERB ALL THE TIME.......not a lot, but light and a little shimmery. I play a lot of fretless usually and I've moved about 250 miles from my house for work and only have one fretted bass with me! Yes, I'm jonesing! Comp./Verb/a bit of Chorus/ and a bit of delay on slower songs, running through my old Tech 21 VT Bass DI.
 
I TOO USE REVERB ALL THE TIME.......not a lot, but light and a little shimmery. I play a lot of fretless usually and I've moved about 250 miles from my house for work and only have one fretted bass with me! Yes, I'm jonesing! Comp./Verb/a bit of Chorus/ and a bit of delay on slower songs, running through my old Tech 21 VT Bass DI.

Same here: Compression, chorus, reverb and occasionally some delay on fretless.

While I really love reverb on bass, lately I've been using a dual delay with moderate feedback on my Meris LVX darn near all the time. It's absolute fire!!

I run it in the effects loop of a Broughton FFXL, which allows me to retain my core tone while effecting 300Hz and above.
 
I decided to go that route (stomp) instead of swap pedals out to find what I like.

I didn't have experience with different effects and didn't know what I would use where and when but the stomp made it feasible for me. I figured I could try different effects without spending a ton of money and it turns out i am really happy with it. It's also cool that line 6 continues to put out updates with new stuff for them, so it's like the gift that keeps on giving.

I don't have a desire to try other pedals. The stomp will get you ~ 90% "there" and none will be the wiser.

I was hesitant… but now that I've had it for 7-8 months I think? I never want to be without it. If it broke, I'd buy another immediately.
I went from 5-6 boutique pedals to a stomp and 3 pedals to just the stomp by itself most times now. You're spot on about being 90%, that's how I describe it although I'd argue the octave and modulation effects are on par with the best out there for bass.

Can I tell the difference between boutique pedals and the stomp in headphones? Yes. Can the audience tell the difference in a mix? Sadly, I don't think so.
 
  • Like
Reactions: bignc and MikoFX
I have a few pedals on my board that would be hard to give up. They are like 99% pedals. The Noble and Octabvre are just what I'm looking for. And the Shure wireless is a keeper.

I am happy with the Horrothia One chorus. It isn't super versatile, but it just sounds great, and I really don't use it on a lot of songs. And then I have the Teeth pedal, which is my favorite overdrive, but I'm still looking for something that makes me want to stomp on it more.

So, making the jump to the Stomp might not be right for me. I know 90% is more than enough, but it's hard to give up the Noble and Octabvre. And if I kept them, I would still have the same real estate taken up on my board. I am now thinking that a better use of funds would be to find the 99% overdrive pedal and then my board would be complete. But, that could change in an hour.
 
It's funny. Our entire sound system is super modern...IEMs, click and guide track, no amps, individual mix accessible through a phone app, all wireless, etc. And I'm like "ah...but, I need an analog chorus pedal."
So, I'm sure that a huge selling point of the Stomp is that it is super versatile and tweakable. But, how is it out of the box? Could someone just open it up, plug it in and be good to go with the presets for a few months?
Speaking of IEM what is everyone running?
 
  • Like
Reactions: MikoFX