• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Wow! Check out this guy's bass!!

Theoretically, wouldn't the resonance not be as good with so much wood missing if it were compared with a bass with the same pickup locations?

Mike Pope's idea is a little more elegant.

On my GAS list is a Stambaugh bass with a J pickup in the 60's position and 70's position that I can switch between.
 
That is beautiful and ugly all at the same time ...

It would be better to just put in 3 fixed puckups each with a on off toggle and a volume and tone control.

No it wouldn't, you can slide the pickup way down near the bridge where you wouldn't want one normally and the bite on it is amazing, similarly, you can get amazing big woody dubness from sliding right up to the neck, again, somewhere I wouldn't want to have a pickup all the time.

I know it's kooky looking, but I like the fact that such a beautifully finished instrument has this huge home made looking anomaly in it..And it's still a work in progress..




xG
 
If he had only re-angled the tailpiece so the G string anchor is closer to the bridge saddle (without interference on the back edge of the bridge chassis, of course) for more down force and more sustain, and the E anchor farther away for less break angle and better tone.
 
I did this to get more tone options:

100_2826_zps9ec70c84.jpg


It used to be a Peavey Millennium J/J but this one didn't sound good as is - which was a bummer because I used to own one and it did sound good as is.

The neck pickup is an SGD Sidewinder and the other two are SGD Neo's. It's passive with a V/B/T setup. The tone is connected to a decade switch (like a varitone without the inductor) with a bypass, 0.01, 0.022, 0.033, 0.047, and 0.1uf capacitors. The 4pdt mini toggle is a series/single/parallel switch for the two Neo humbuckers.

The last knob is a pickup pair selector. Setting one gives me the neck pup as "neck" and middle pup as "bridge". Setting two gives me the neck pup as "neck" and bridge pup as "bridge". Setting three gives me the middle pup as "neck" and bridge pup as "bridge". Finally, setting four gives me the neck pup as "neck" and middle + bridge pups as "bridge".