• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

WOW - TC BAM200 Price today on Amazon

Used mine on a rehearsal last night with electric bass through an 8 ohm Darkglass cabinet. It definitely performed much better than it did with upright. It'll be fine for rehearsals for however long it lasts, convenient since it can fit in the gig bag.
I carry my BAM200 in the same case as my Quilter BB800. Very convenient.
 
So far so good.
I got one of the: "new new wrapped in Plastic" ones and so far so good.

This link was very helpful:
This person uses a frequency analyzer to determine FLAT settings on the BAM 200. They are not what we think they are:

I have not done the 3+hour: "see if it will fail now" test.
Short practice through a GB Focus 112 8ohm - applying the EQ guidance above - was very nice...
On one hand this would be a great backup...
How confident can one be in a backup that may need a backup?...
 
My bam200 is arriving today. maybe I'll have one of the ones returned by you guys. haha

i'll keep the fire extinguisher next to my desk
Amazon came early. Plugged it in. It is relatively loud and the tone is very vanilla. There is no magic to the amp. I've only played around for the last ten minutes. I rattled the windows but it sounds like a clean amp with nothing exciting about it. For the price, I would keep it but I have some other options fo i'm on the fence. But because i'm reading about all these strange things, I would turn around if I left the if I forgot to turn it off.
 
Yeah -- better to support a small business.

The BAM arrived but was DOA. Headphone works but not the mains. Asked Amazon for a replacement, NO they said just a return. I also tried the repair center in Las Vegas from a thread before Thermal Relief, but they won't do it. So Amazon Warehouse is not that great anymore with refurb items because they obviously do not test retuned items if they look cosmetically perfect. They also did that that with a refurbed eBow, looks nice but a broken switch. But Heet was good and they repaired it and very quick response.

So I was able to reach Jay. He will make me one (he does not stock this and it looks 2 - 3 weeks before he can ship it) I got me a NUX MLD Preamp instead and a small pedal board. Will fit in the speaker bag outside of my 1X10 Wizzy. Will use my HB2 preamp if I am bringing my upright bass.

What is the repair center in Vegas?
 
What is the repair center in Vegas?

Thermal Relief Design

I got it from a thread and they were identified as the warranty repair company for TC electronic or Music Tribehttps://www.talkbass.com/threads/tc-rh750-no-output-anyone-work-on-these.1515728/#post-25266967
If you used google search they would come up:

TC RH750 no output. Anyone work on these?

The Amazon refurb warehouse could have tested these first and have faulty units repaired rather than reselling. I marked the amp with white perm maker saying BAD OUTPUT, so they don't resell them again unless fixed
 
  • Like
Reactions: Alessandro Cruz
I once purchased a brand new TC BAM200 around the first quart of 2020, just before the COVID... I was happy with the BAM200, and later I've discovered the Gnome from Warwick.

At first sight, it looked the very same hardware piece with a different shell and colors. But later I found the Gnome more pleasing to my ears, and despite having the same power output numbers, the EQ section of the Gnome seems more effective. But I could have purchased the BAM200 again, anytime, no complaints...
 
Did you get the US voltage or EU? Thomann has great prices but only the EU units and they don't seem switchable. I heard the same review about the matching 208 cabs- I love the TC28 but the Warwick has a horn and I great sounds great.

US voltage, actually I purchased all the amps ( TC and Warwick ) from Sweetwater and Cream City Music thru Ebay. You'll be well served with both amps and both stores, great prices and support so far.
 
  • Like
Reactions: Bassiclees
Well, guys, mine's going back. It sounds defective. It has a static-y "buzz" no matter what I'm playing through it. Not a good distortion or anything - even at low volume, it sounds scratchy. I was looking for a clean portable backup amp - this unit isn't it.

Glad to hear some people benefited from this, but mine was a dud.
 
Well, guys, mine's going back. It sounds defective. It has a static-y "buzz" no matter what I'm playing through it. Not a good distortion or anything - even at low volume, it sounds scratchy. I was looking for a clean portable backup amp - this unit isn't it.

Glad to hear some people benefited from this, but mine was a dud.

If you don't mind - could you share any info on the serial number?
Mine is still going great - it gets hot, but I had it on a foam skid pad and that was a mistake on my part - limiting air flow.

Thought is the we might be able to share/find the "dead zone" by SN.
And I did save all the packaging...so I got that going for me.
 
If you don't mind - could you share any info on the serial number?
Mine is still going great - it gets hot, but I had it on a foam skid pad and that was a mistake on my part - limiting air flow.

Thought is the we might be able to share/find the "dead zone" by SN.
And I did save all the packaging...so I got that going for me.

Sorry... mine is on its way back already. Too late to check the serial #.
 
  • Like
Reactions: DaDo625
Seems the Warwick Gnome or the GK Demo stock is a better call for a sub $250 head. Before they disappeared, the Eden Terra Nova 226 was a superb value.

Agreed. I sold my Gnome and do regret it a bit. Great amp. Clean, powerful, with a great EQ. I haven't looked into it, but I have a feeling it may be a much more flat starting point with all the knobs at noon versus the BAM and some others.
 
  • Like
Reactions: Alessandro Cruz
Agreed. I sold my Gnome and do regret it a bit. Great amp. Clean, powerful, with a great EQ. I haven't looked into it, but I have a feeling it may be a much more flat starting point with all the knobs at noon versus the BAM and some others.

I'd be tempted by an iGnome at 280W@4Ohms if it was sufficiently clean to also potentially use in something close to FRFR situations. I wish they'd put an effects loop on the thing.
 
  • Like
Reactions: Alessandro Cruz
I'd be tempted by an iGnome at 280W@4Ohms if it was sufficiently clean to also potentially use in something close to FRFR situations. I wish they'd put an effects loop on the thing.

Dude go for it. It is a REALLY great amp. I don't know what the actual guts are in there regarding compression, eq, etc, but I have had the Elf, BAM200, and the Gnome iPro, and the Gnome is the only one that feels like a 500w+ amp when played at medium/moderate volume levels.

Both the Elf and Bam seem to have quite a bit more limiting or compression of some sort built-in... maybe it's just a more aggressive HPF with higher set point or stronger roll-off, I don't know. When playing those two, digging in and really attacking the strings doesn't give you the corresponding increase in thump/weight/heft that you would experience with a bigger amp with plenty of headroom on tap. Now, that being said if you LIKE that, GREAT! That's the amp for you! I don't.

I'm not sure if I said it in this thread or not already, but the Gnome very much feels and sounds like running my Legacy 800 clean. I even EQ them similarly, with a fair amount of high end roll off, and sometimes a little bit of mid roll-off as well, depending on the bass. Lows flat or barely boosted. The GK naturally has a touch more upper mid presence with the EQ flat, but other than that they are pretty darn close to each other.


Dangit..... now I'm going to text the friend to whom I sold the Gnome and tell him that if he ever sells it, I want to buy it back. As I sit here typing this all out I realize more and more how much I really enjoyed that thing!

I hear you on the FX loop. I would pay more if they would dump the USB interface and put an FX loop in there instead!
 

Latest posts