X2 issues

[nvd]

Hello fellow x2 owners, I am curious if anyone has been experiencing the problems I have been having with my wireless unit. During gigs I have quite a problem with staying still and end up running around, jumping around, and doing my bass dance. But what I have found is that each bounce I make the x2 transmitter whether it's in my back pocket or on my strap cuts out.

Now each time this has happened I switch to my trusty ole' cable and have no issues the rest of the show. And tend to the next day test out the x2 again and low and behold it always works. But it took me a number of times to deduce that the only difference in scenarios is me moving around. So has any one else experienced this or did I just end up with a lemon?

 

[pbass62]

1st thing to check would be the 1/8 plug. Make sure it is properly seated in the xmttr. The x2 system I had I made a new inst cord w neutrik ends and canaire cable. The stock cables have been known to have their share of problems

 

[JackANSI]

+1 on the cable thing. Happened to me once, Line6 support sent a new one for free. That was enough to hold me over till I built a nicer one..

 

[nvd]

Thanks people, it was the connection on the 1/8" input, I made sure it was seated tightly in the transmitter and checked the wiring in the cable for loose solder and it seemed to work just fine and dandy at the gig I had this past weekend.