So I recently changed my bridge pickup and I needed to resolder both of my P and J pickups because both were wired on top of the same pot. Not a big deal.
until i recently noticed that both of my Volume knobs are essentially On and Off switches they both at a 100% are the loudest as possible then under 90% it goes really weak until about 20% it drops until the pickup is off.
I didn't remember that happening when i had the old bridge pickup
I have never soldered before until then so I'm pretty sure its a sh*t solder job
until i recently noticed that both of my Volume knobs are essentially On and Off switches they both at a 100% are the loudest as possible then under 90% it goes really weak until about 20% it drops until the pickup is off.
I didn't remember that happening when i had the old bridge pickup
I have never soldered before until then so I'm pretty sure its a sh*t solder job
