You ain't never seen MOJO like this!

[Korladis]

Thanks for coming into my thread to poop on my parade. Feel pretty good about yourself? "Sorry to be the one to say it?" Doubt it.

Ignore him, he posts like a jerk to people pretty frequently.

 

[billiam5billion]

I'd put the old knobs back on.

Bass looks great.


Hmmm we get regular Typhoons here, maybe I should leave my Jaguar up on the roof during one...

I might have but the chrome was flaking off on my fingers and I don't entirely trust 70's construction materials to not be packed full of lead and old cigarettes.

 

[Felken]

Looks damn nice.

 

[Feral Feline]

I might have but the chrome was flaking off on my fingers and I don't entirely trust 70's construction materials to not be packed full of lead and old cigarettes.

Good point.

So this would be a bad idea?...

Strip 'em right down, shoot some lead-based primer and then replace all that flaked-off chrome with super-shiny asbestos and then coat the whole mess in, what was that stuff in the Ampeg baby bass? Oh yeah, Uvex. Coat the whole thing in Uvex...


Joking aside, there's some good info from Erlewine at Stewmac on aging/relicing hardware — salt bath and a 9V battery are involved if I recall at all. Dip the new knobs in for 3-5 minutes...

 

[RobTheRiot]

Awesome job!
I'm not generally a fan of "relicing", but real life wear and tear, or scars from a true survivor story is totally different.
You did an amazing job bringing her back from a waterlogged piece of wood to a bass with real personality and a great story!
Enjoy, and thanks for sharing!!

 

[MVE]

Sorry to be the one to say it but there's a huge difference between true mojo & junk..

I think a hurricane/flood rescued instrument is pretty much the definition of “true mojo”.
What would it take to qualify as earnest wear for you? A dent from the bullet that would have pierced your heart had the bass not been there to save your life?

 

[madbass6]

I think a hurricane/flood rescued instrument is pretty much the definition of “true mojo”.
What would it take to qualify as earnest wear for you? A dent from the bullet that would have pierced your heart had the bass not been there to save your life?

Just my opinion..
Original wear on a Bass from years of playing or of it's existence = MOJO! unfortunate circumstance damaged Basses from floods,natural disasters, etc. doesn't fall into the MOJO category!
Even if it saved my life covering that bullet!

 

[wvbass]

I think a hurricane/flood rescued instrument is pretty much the definition of “true mojo”.
What would it take to qualify as earnest wear for you? A dent from the bullet that would have pierced your heart had the bass not been there to save your life?

How high do you wear your bass???

The OP's bass looks great. I probably wouldn't have tried to restore it further than that either.

 

[billiam5billion]

I think a hurricane/flood rescued instrument is pretty much the definition of “true mojo”.
What would it take to qualify as earnest wear for you? A dent from the bullet that would have pierced your heart had the bass not been there to save your life?

It's not real mojo unless you had to beat a hobo to death with it on a train when he tried to steal your beans while you were playing with Guthrie before Fender existed.

 

[SJan3]

Some of you might've already seen my earlier thread about my father-in-law's 1977 Precision getting dunked in the drink during Hurricane Harvey. Here's the thread-https://www.talkbass.com/threads/hurricane-harvey-victim.1301869/

As you can see, there was extensive damage to pretty much every component of the bass. Everything was rusted out, the finish had lifted almost completely off, and the electronics were junk. I took it all apart down to the very last tiniest screw, and started the rehab.

First, I didn't touch anything for a few weeks. The results of the finish settling can be seen in the later pages of the above linked thread. I soaked all the metal components in vinegar and salt for a day, and then scrubbed all the rust off with an old toothbrush. Then I sprayed a light coat of WD-40 on them and wiped them gently with a soft cloth. The bridge, tuners, and screws all came out just fine. The knobs were a wash, since the chrome plating bubbled up and flaked off. I ordered some standard flat-top chrome knobs from ebay.

Then, after almost a month, I chipped and sanded and scraped all the old finish off the fretboard and some off the headstock. I taped the frets and nut and gave it a few coats of clear-coat auto lacquer. I tried to leave the headstock looking rough and to not sand the decal off. Whatever of the old coat that I left on it melded pretty well with the new clear coat. I let that sit for 3-4 days.

I had already assumed that the pots and jack were junked, but I realized that the coil plates were also warped beyond being able to sit properly in the pickup covers. I was pretty bummed about that, since the essential voice of the bass couldn't be restored. I got a 60's style fender licensed set of pots, with cloth wiring, and a set of mid-2000's MIM pups, and wired them all up.

Finally, I put everything together and threw some spare strings on it. Plugged in, and lo and behold, it sounds like a Pbass. The MIM pups are a bit thinner than what I'm used to, since my bass has super hot and growly Rio Grande vintage pickups, but it has the thump for sure. The neck is very comfy and round in my hand, and since I decided not to spray the back, it's also very fast and smooth. All in all, while the bass definitely misses its original electronics, it's still quite a player. The most important thing to me is that the neck didn't twist (not a single buzz spot or raised fret) and the body returned to it's original size and shape. Everything fits perfectly and it's very easy to play. Still super heavy though, so I for sure like mine better, hahaha.

Alright, hope you enjoyed the journey of this old guy, now for what you all came here for-the coolest MF'in mojo I've ever seen.
Before-
View attachment 2776258
View attachment 2776276
View attachment 2776277
View attachment 2776278
View attachment 2776279

Aaaaaaaand...AFTER-
View attachment 2776281
View attachment 2776289
View attachment 2776290
View attachment 2776291
View attachment 2776292
View attachment 2776293
View attachment 2776294
View attachment 2776296
View attachment 2776297

That would make Bill Nash proud!

 

[The Bass Clef]

@billiam5billion , I have an original 1976 P pickup, pots, cap & jack that would be correct to restore that ‘77 with if you’re interested. Feel free to PM me if you’d like.