Zoom b3 patch Ideas

[Crystalman85]

Here's another patch idea I came up with. this patch is similar to the digitech bass distortion patch, only with a proco rat model(since one of the morph settings duplicates a proco rat).

Digimetal

Section 1: squeak: gain: 70, tone: 35, level: 100, balance: 25

Section 2: any effect you want

Section 3: fliptop: bass: 4, mid: 4, treble: 3, midfq: 250hz, gain: 45, level: 90, ultra: low, cab: ag8x10, mix: 50

 

[OzzyGreg]

.

.... and advise on certain things with the zoom b3.

That's the stuff that should be elsewhere IMO.
Clutters what is otherwise the best source of B3 Patch Ideas on the 'net.

 

[TitaniumRx]

.
Not intending to sound like the thread police, but this "Zoom B3 Patch Ideas" thread is really heading off topic guys.

No big deal, unless you're a newbie scrolling through, trying to find something in the future and getting jumped on when you post a new question/topic about that same thing because you gave up trying to find it amongst all the off-topic stuff in other threads!

Crystalman85's original posting:



Shouldn't a lot of this (non-Patch Idea) discussion be in one of these?
Zoom B3 - good enough amp models and effects for guitar?
or
Zoom B3 As Preamp Part 2
or even the old
Zoom B3 multi-effects part 2
or one of the other countless non-Patch Idea topics in TB?

.... just sayin', you know?

Absolutely right OzzyGreg.I just delete my last offtopic post.Lets keep the place clean.

 

[jwilson67]

J it's perfect! Honestly sometimes I wonder why I even us an amp? This patch has that 80's wonky mid thing going on. I rolled back the neck pickup on my 62 jazz just a bit and boing! Awesome! The only thing I did was added a little more of the cab sim since I had headphones on.
Take care,
Brent

Glad you like it! After creating the patch with a mixer and headphones I fine tuned it at soundcheck before my show two weekends ago so that I knew it would work in a band setting. If I get a chance today I'll hook up my B3 to the computer and put my other 4 patches up.

 

[Crystalman85]

.


That's the stuff that should be elsewhere IMO.
Clutters what is otherwise the best source of B3 Patch Ideas on the 'net.

I haven't noticed any off-topic posts, but thanks for reminding everyone here about it.

 

[Crystalman85]

Here's a new patch I came up with. this patch is similar to mr. beef 2, only with an aguilar amp model and an exciter effect which gives it a warm and edgy sound that can fill up the band mix.

Mr. beef 3

Section 1: exciter: bass: 3, treble: 4, level: 90

Section 2: t-scream: gain: 30, tone: 70, level: 100, balance: 45

Section 3: ag amp: bass: 3, mid: 4, treble: 5, midfq: 250hz, gain: 40, level: 90, char: both, cab: ag8x10, mix: 50

 

[Crystalman85]

Here's another patch idea I came up with. this patch is an updated version of the tight metal bass patch.

Tight metal patch 2

Section 1: m comp: thresh: 20, ratio: 4, level: 90, attack: 7

Section 2: squeak: gain: 70, tone: 45, level: 100, balance: 25

Section 3: bass: 4, mid: 4, treble: 3, midfq: 300hz, gain: 40, level: 90, char: both, cab: ag8x10, mix: 50

 

[Crystalman85]

Here's another patch idea I came up with. this patch is an updated version of the fat metal bass patch.

Fat metal bass 2

Section 1: m comp: thresh: 20, ratio: 4, level: 90, attack: 7

Section 2: squeak: gain: 70, tone: 45, level: 100, balance: 25

Section 3: monotone: bass: 4, mid: 4, treble: 3, midfq: 300hz, gain: 40, level: 90, char: both, cab: ag8x10, mix: 50

 

[OzzyGreg]

I haven't noticed any off-topic posts, but thanks for reminding everyone here about it.

This current batch started on page 67.

 

[Crystalman85]

This current batch started on page 67.

Okay I kinda see what you're talking about. and I will agree that off-topic posts like that should be discuss on other threads. this thread was meant for patch ideas. and on some occasions, requests.

 

[Crystalman85]

Here's a new patch I came up with. this patch closely duplicates the overdrive channel of the fender rumble v3 amps.

Rumble distortion

Section 1: m comp: thresh: 17, ratio: 4, level: 90, attack: 90

Section 2: squeak: gain: 25, tone: 50, level: 100, balance: 15

Section 3: b-man: bass: 4, mid: 3 , treble: -2, midfq: 250hz, gain: 40, level: 85, deep: off, cab: e4x10, mix: 50

 

[Crystalman85]

Here's another patch idea I came up with. this patch closely emulates the vintage sound from a fender rumble v3 amp.

V3 vintage

Section 1: m comp: thresh: 17, ratio: 4, level: 90, attack: 90

Section 2: any effect you want

Section 3: b-man: bass: 4, mid: 2 , treble: -3, midfq: 300hz, gain: 40, level: 90, deep: off, cab: ac1x18, mix: 50

 

[Crystalman85]

Here's another patch idea I came up with. this patch closely emulates the bright sound from the fender rumble v3 amp.

V3 bright

Section 1: znr: thresh: 17, detect: gtrln, level: 100

Section 2: exciter: bass: 2, treble: 4, level: 80

Section 3: b-man: bass: 3, mid: 4 , treble: 5, midfq: 250hz, gain: 45, level: 85, deep: off, cab: ha4x10, mix: 50

 

[Crystalman85]

Here's another patch idea I came up with. this patch closely emulates the scooped sounds based on the contour sound from the fender rumble v3.

V3 contour

Section 1: m comp: thresh: 17, ratio: 4, level: 90, attack: 90

Section 2: d.i plus: bass: 3, mid: 0, treble: 2, gain: 50, blend: 70, level: 90, color: on, chan: clean

Section 3: b-man: bass: 4, mid: -2 , treble: 3, midfq: 300hz, gain: 45, level: 90, deep: off, cab: gk4x10, mix: 50

 

[Crystalman85]

Here's a new patch I came up with. this patch was inspired by a friend's rig. this patch has a stacked bass sound with some crunch and some punch. suitable for rock and metal music.

Crunch metal bass

Section 1: m comp: thresh: 20, ratio: 5, level: 90, attack: 7

Section 2: d.i plus: bass: 4, mid: 4, treble: 5, gain: 50, blend: 20, level: 100, color: on, chan: dist

Section 3: ag amp: bass: 4, mid: 4, treble: 3, midfq: 300hz, gain: 45, level: 90, char: bright, cab: e4x10, mix: 50

 

[dustin shelton]

hey guys I'm wanting to try out these patches how do I find the empty patches like on the ms-60b. Or to make a new one do I have to get rid of one of the ones that came on it

 

[Linnin]

Or to make a new one do I have to get rid of one of the ones that came on it

That is correct. You have to overwrite an existing patch.

 

[dustin shelton]

k thanks also sorry this is a little off topic but how do I get the sound to only come from headphones.. when I plug in my headphones the sound still comes from my amp as well. anyone else have this problem

 

[cvsurg]

k thanks also sorry this is a little off topic but how do I get the sound to only come from headphones.. when I plug in my headphones the sound still comes from my amp as well. anyone else have this problem

How are you set up? Unless I'm missing something, just unplug the B3 from your amp, but leave the headphones plugged into the B3.

 

[OzzyGreg]

.
A better forum for general Zoom B3 discussion!
Not here.