Today I've decided to create an experimental board out of the effects that I have left over 
So far the board is as follows (order = left to right):
The NS-2 is going to be a new purchase so that I don't have to take my other board apart, and the punch factory is not included yet cus I'm not sure where to put it. I'm thinking that the PF could go before or after the fuzz, and any other sugestions/opinions would be greatly apriciated
I'm also thinking about including the Boss V-Wah I own as a second fuzz/dist/wah thingy. I was thinking about putting it before the wah and maybe switching the EM to after. I could set up the v-wah so that I could have the follow effects order (all switchable on/off):
Wah (from v-wah) -> Dist/fuzz (also from v-wah) -> wah (Dime CFH) -> Fuzz (EM)
eek: If I do that then where would I stick the PF 
)
/rambling
On a less confused note I am also thinking about getting a Whammy and putting it before the NS. What other effects would be kinda crazzy and work in this mess??? and where would I put them???
==========================================
EDIT:
Messed around with the FX after posting this and came up with a cool setup (so far):
I'm using the Muff'n as a preamp and it's working out quite well and I use the volume for a suedo-bowed type effect that the verb really makes quite ominous. The setup for the PW-10 is as follows:
The PW-10's wah is always on, and the pedal is rocked back to "turn off" the uni-vibe. I can then use the heel switch to turn the fuzz on and off. The great thing is that, with the PW-10 fuzz on and the EM really dirty, I get a kinda cliff burton thing going on with the CFH. But, when I turn the PW-10 fuzz off, the CFH rocked back gives a nice lo-mid-boost that the mid on the EM misses
The actual effects path is now:
Fuzz(PW-10) -> Uni-Vibe -> Wah -> Fuzz/Preamp -> Vol -> Reverb
I'll probably post actual pics and samples in the post your pedalboard thread tomorrow.
So far the board is as follows (order = left to right):
The NS-2 is going to be a new purchase so that I don't have to take my other board apart, and the punch factory is not included yet cus I'm not sure where to put it. I'm thinking that the PF could go before or after the fuzz, and any other sugestions/opinions would be greatly apriciated
I'm also thinking about including the Boss V-Wah I own as a second fuzz/dist/wah thingy. I was thinking about putting it before the wah and maybe switching the EM to after. I could set up the v-wah so that I could have the follow effects order (all switchable on/off):
Wah (from v-wah) -> Dist/fuzz (also from v-wah) -> wah (Dime CFH) -> Fuzz (EM)
eek: If I do that then where would I stick the PF )/rambling
On a less confused note I am also thinking about getting a Whammy and putting it before the NS. What other effects would be kinda crazzy and work in this mess??? and where would I put them???
==========================================
EDIT:
Messed around with the FX after posting this and came up with a cool setup (so far):
I'm using the Muff'n as a preamp and it's working out quite well and I use the volume for a suedo-bowed type effect that the verb really makes quite ominous. The setup for the PW-10 is as follows:
Code:
Manual Mode:
- Wah Type = Uni-Vibe
- Intesity = Max
- Drive = Min
Memory #1 (Red):
- Wah Type = Uni-Vibe
- Intensity = Max
- Drive = Max (Unity Level 11 o'clock)
- Dist Type = Muff Fuzz
Heel Switch = Manual <-> Mem 1The actual effects path is now:
Fuzz(PW-10) -> Uni-Vibe -> Wah -> Fuzz/Preamp -> Vol -> Reverb
I'll probably post actual pics and samples in the post your pedalboard thread tomorrow.
, I'll try that 1st, though I don't have the whammy...yet 
