Recent content by smurfy27

I have both. I also have an Eden rig to compare to. The Eden DI certainly has that smooth low end tone that Eden is known for. The gain, however, is very hot and sensitive and mine (I think it's a rare case) makes a popping sound when I hit the switch true bypass switch. I love the tone I get...

I currently play an Eden wt330 with a 4 ohm peavey 210 (350 watt I believe) and a trace elliot 115 (350 watt). The head pushes 420 watts at 2 ohms. I'm looking at a peavey tour 410 and peavey tvx 115 setup to replace my current setup. Just wondering what (if anything) I would gain from this...

Thanks for all your help. Since I've never done this before I'm still going to take it to be professionally set up and then if I need the action adjusted up or down from there I can do it. I just don't like the idea of playing with the truss rod when I really don't know what I'm doing. Plus I...

I just bought a "new to me" Lakland 55-02 and the action is lower than I like. Can I simply adjust the saddle height to raise the action or do I need to go through the truss rod, nut and intonation adjustments too? Thanks

Ok thanks. I just hear lots about matching the wattage of the amp and cab so that its not being over or under powered.

I came into a 500W, 8 ohm avatar 210 cab and I am just wondering if I would be damaging my Eden WT330 head to power the cab. I also use a 4 ohm, 300W Trace Elliot 115. I know my amp can go to 2 ohms, its more of a wattage question. Thanks!

Hi, I just got an Eden Nemesis NSP210 cab and I'm having trouble with one of the speakers rattling. It almost seems like a porting issue cause when you remove the handle on that side it eliminates the rattling. Nothing seems to be loose inside the cabinet itself. Any ideas as to how to fix...

I'm looking at replacing the speaker in my CXC112 cause it's been farting really bad once you get to a volume that may be equivalent to normal conversation. I'm looking at an Eminence Delta pro but am reading a lot about port tuning and all this stuff which I don't really understand. Can...

did you do this with a CXC112 or a different one? cause i think the 110 version is slightly different this way so some of the other models may be different too?

Anybody have any experience with removing the WT330 head from the CXC112? (or any of the CXC amps for that matter)

I am looking at getting a GK 400RB-III which is rated at 240 watts at 4 ohms. I have a 300 watt, 4 ohm 1x15 cab. I just want to make sure this would work fine and i wouldn't end up blowing something.

Not that it matters but i believe Trace Elliot was taken over by Peavey.

Is it worth the extra money to get the 700 if i most likely wont even be using a 400 watt amp to capacity?

I'm looking at getting a new head and have a fairly short budget. Right now im looking at 3 heads, the peavey tour 450, GK 700RB-II, and the Ampeg SVT450H/B2RE. I've heard about some problems with the B2RE but i dont know if the same problems exist in the SVT450 where it is essentially the...