Peavey cab setup

[smurfy27]

I currently play an Eden wt330 with a 4 ohm peavey 210 (350 watt I believe) and a trace elliot 115 (350 watt). The head pushes 420 watts at 2 ohms. I'm looking at a peavey tour 410 and peavey tvx 115 setup to replace my current setup. Just wondering what (if anything) I would gain from this. Would I get any more headroom/volume? Anyone have experience with either or both of these cabs?

Thanks

 

[georgestrings]

Go all 10s or all 15s - you're better off that way...


- georgestrings

 

[Downunderwonder]

The current 2x10 is getting more than its fair share of power. You could find another one to make a very loud vertical 4x10 which will have a tad more output than the current stack but more importantly project your desired tone cleanly and evenly.

My only cab for 15 years was the 1518 Trace, lately supplemented with SWR Goliath JR. 2x10.

4x10 plus 1x15 is worst of all possibilities.

 

[Noot]

You must check the RMS power, not the handling power. I believe your Peavey 210 is rated at 175W RMS. I have a Peavey 410TVX rated at 350W RMS and I can say it's loud and clear, though not the most refined sound and it's also very heavy.