Search results for query: *

Hey everyone, I recently took my EMG GZR PJ pickups out of my 2018 Fender PJ Mustang to put in another bass I was using more frequently, and I've been trying to get the original pickups back in place. I have gone through a number of permutations of wiring but no matter what I do, I can't get...

Hello fellow TB'ers! I just put out a free album of original music that I composed and performed. I'd call it "Progressive Rock" but "Rock" is just fine. It's a 6 song EP called "From 10 to 11" You can stream it at SoundCloud: Or you can stream/download it at BandCamp: Enjoy! --- Mods...

Up for sale is a Sterling by Musicman SUB series Ray4 neck in rosewood. The neck is loaded with the original tuners. It is lightly used. No marks, gouges, or scratches. There is barely perceptible fret wear. Super condition. I got this for a project that never transpired, so this is up for sale...

Up for Sale is a Squier VM Fretless Jazz Bass Body. It appears to me to be a four piece body. The Sunburst Finish has more of an orange finish than yellow, and the red is nicely done. The year this body was purchased was 2009. It has had several upgrades. Most notably, it has a genuine Fender...

Up sale is a gently used EHX Bass Soul Food pedal. It will be shipped in its original box and will include its original power supply. It really only has three months of use and has not been gigged with. It does have Velcro on the bottom, it's ready to mount and play straight away. It works with...

Up for sale is a used Zoom B3. It will be shipped in its original box, with its original and functional power supply, and the original manual and other paperwork & software. The B3 is up to the most recent firmware. It has Velcro on the bottom. The original soft rubber feet were pulled off to...

For sale are the complete electronics from a Squier Affinity PJ. Included are the pickups, pots, wires, the jack, the 8 pickups screws and springs, and the matching split shaft chrome knobs. $15 + calculated shipping, not to exceed $8 to the lower 48 Squier Electronics by stshipley posted Jul...

Up for sale is a good working Sterling by Music Man Sub Ray5 pickup. It is in perfect working order. $10 + calculated shipping not to exceed $7 for the lower 48. Pickup Front by stshipley posted Jul 18, 2017 at 10:23 AM Pickup Back by stshipley posted Jul 18, 2017 at 10:23 AM

Up for sale is a Sterling by Musicman SB14. This is the SBMM version of the USA Sterling (confusing verbiage!!) It has the ceramic pickup, 3 way selector switch (parallel, single coil, series), smaller body, and the more "jazz bass" like neck. SBMM no longer makes SB14s so this is a rarity. The...

[Invalid or Expired Link Removed] Note the pic of the cracks in the body.

Up for sale is a gently used TC Electronic SpectraComp compressor pedal. This pedal was purchased brand new last summer, and has been used and gigged with. It is a very effective pedal. It does have Velcro applied to the bottom. Like many of the small form factor TC Electronic pedals, it has a...

For sale: 1 gently used Squier 4-string bass neck plate and the mounting screws. $8 shipped via USPS. Reasonable best offers will be entertained.

For sale - used Hipshot Vintage bent style bridge for Fender 5 hole mount. It's chrome and fits 4 string basses. Screws are included. $45 shipped in a padded envelope via USPS Parcel Post

Up for sale is a Black Project P/J bass body. No pick guard, bridge, strap buttons, pickups, or electronics are included - just the body. I believe this was originally a Korean Squier Precision bass body, so that dates is somewhere between 1992 and 1996, though my dates could be way off. It...

Up for sale is a White Fender 60's style Precision Bass Pickguard. The 60's Pickguard has factory pre-drilled holes for the lower tugbar placement and for the pickup cover. I used this in a P-J arrangement, so I did have to drill a 4th hole to accommodate the 3 pots and the jack. Price is $15...

Up for sale is a Chinese made generic Jazz Bass neck, styled like a Fender. I bought this off of eBay a few months ago. The link to the auction on eBay is here: Yellow Maple 21 FretNeck For Electric Jazz Bass Guitar Neck Parts Replacment | eBay I got it for price, the darker maple tint and...

Up for sale is a well used OLP MM2 bass. It has a maple neck and has a laminated top for the body and headstock. It is a passive bass, but I can throw in a preamp from a Sterling SUB (and a 25K pot for the Sterling volume mod) if you are interested. The original tort pick guard is included in...

Up for sale is a 2009 MIM Fender Jazz Bass Neck. It is the newer logo headstock with the "vintage tint" to the maple. It is a rosewood fretboard. I got it new off of eBay, and separately purchased and installed the Fender MIM Tuners and the All-Parts String retainer. The neck has two primary...

Up for sale is a used Digitech X-Series Bass Driver. I got it used from a local guitar store. It is in perfect working order with either battery (no included) or from 9V (I used a One Spot to power it.) There are very little signs of wear, some scratches in the red paint. The primary "defect" I...

Up for sale is an 80's USA-made Peavey Fury. The bass is the rare sky blue color. The neck has a jazz bass 1.5" width and feel, maybe slightly chunkier than a jazz. As best as I can tell the pickups and electronics are stock, though the knobs are probably not. The pickguard has some...

Up for Sale is a Sterling by Music Man SUB series Ray5. This model is black with a maple fret board. I took out all the electronics and installed an EMG-X MM5TW pickup. This has a push-pull volume pot that allows you to select between the dual coil Music Man sound or a single coil. Installation...

Up for Sale is a Sterling by Music Man Ray34ca (Classic Active). As you can see in the pics it has the maple fretboard and the sunburst finish. The bass is completely stock, no modifications. This is the SBMM version of the EBMM Classic series, which means it has the 2 band EQ that boosts the...

Up for Sale is a set of EMG P/J pickups (with full harness and pots) that I've used in different basses since they were installed in 1991. Obviously, with the age of these pickups, they are NOT solderless, they have cosmetic issues (the EMG gold logo is almost totally faded) and one of the wires...

Up for sale. A gently used MXR M89 Bass Overdrive pedal. I bought this a few weeks ago from TB'er mam1862. The pedal is in perfect working order, and it does not have any scratches in the paint. It does have a large piece of velcro on the bottom (pictured) and a tiny bit of adhesive residue on...

Up for Sale are some various Fender and Squier Jazz bass parts First up: Squier VM 70's Jazz Neck, maple neck, blocked and bound, including the original tuners. Truss rod is functional, though honestly I haven't needed it as the current action is good. The neck shows some signs of wear, mostly...

Up for sale are parts from a Jazz Bass that was "blacked out." First up is black jazz bass pickguard with black screws. The screw holes and pickup hole match MIM Fender Jazz basses. The wedge where the control plate is slightly recessed. See the picture of the black guard on top of a white...

Time to clean out the proverbial parts drawer . . . All items listed are for sale. I'm not interested in trades at this time. First up, Brand New, unused Fender Tuners. Includes the bushings and screws. SOLD SOLD Next, EMG J pickups with quick-connect and V/V/T harness. Short and Long...

Hello fellow TBer's ... For Sale is a USA made EBMM Sterling 4H. I am not really interested in trades, unless it's for a USA EBMM Stingray. The Sterling is a 1998 model in black and I have both black and white pearloid pickguards. I also am including the original EBMM case, which is very...

All, I have a parts bass with a Classic 70's body, and I LOVE the tone of the bass. I also like to play basses tuned D-G-C-F instead of the E-A-D-G tuning. On a 60's / normal spacing bass, the tone changes a little but still sounds like a 60's Jazz bass with the lower tuning. On the...

All, For Sale: 1 Squier Bullet Bass Body in black. The neck, which I am keeping, has a date of 8/11/1984. The bass is well used, perfect for your relic/"mojo" project. The bridge, pickups, pickguard, knobs, pots and jack are all original. I cannot verify that the strap pins are original, but...

For Sale: One complete EMG BTC System. Everything that came in the box new is included in this auction - the jack, balance control, BTC, master volume, all cables, the EMG knobs, the solderless cables, the battery buss, even the red and black shrinkwraps for those that want to attach to...

Hi, For sale is a 1998 MIM Fender Stratocaster neck. The neck is in very good condition, has not been gigged or in a smoking environment. It's very clean and straight. The frets are vintage style, not jumbo frets. The heel didn't line up on all the screws for the body, so I filled the holes...

Hi, Up for Sale is a Squier Vintage Modified Jazz Bass Body, fully loaded. Neck screws and neck plate are not included. The body is a 2010, has been pretty well used. I did not use the Duncan Designed pickups, but I put them back in for this sale. There is only 1 ding in the poly finish, in...

Folks, For sale, a matched set of EMG JV Jazz pickups. These are the Quick Connect version. This does not include the QC cables or harness, or mounting screws, just the pickups themselves. Pictures available on request. ***Price Drop*** $55 shipped (US) -STS

*** SOLD *** Pictures available on request. I will consider trades. I have the manuals and original power cable. $70 + shipping to US -STS

SOLD, one Audere JZ3. Bought from Ampig two months ago, but I decided I preferred my EMGs. AS you ca n see in the picture, the paperwork and manual is included. It is a fully functional, and was only ever used in a smoke free environment. $120 + shipping in the lower 48, will consider...

This is a clean, working pull from a Squier VM Fretless. The leads are about 8" long each. They were only ever in a smoke free environment. $20 shipped in the lower 48. -STS

All, So after shielding and grounding the inside of my jazz bass, I get less hum, but the hum completely goes away when I touch the control plate. Touching the strings, bridge, or pickups poles has no effect on the buzz, just touching the control plate, which make the buzz absolutely gone...

Hello again folks, *NOW ACCEPTING REASONABLE OFFERS* Up for sale, a used Squier Classic Vibe Jazz Bass Neck. This includes the neck and all hardware - tuners, string tree, neck plate and screws. I was amazed at the quality of this neck, but I have to "thin the herd," as the cliche...

Folks, Some various Squier bass parts for sale: ** The Body and pickguard have been sold **** First, a Squier P/J body (P Bass Special) that I got off eBay. The previous owner had painted it flat black. I tried to paint it glossy black and put a poly coat on it, but the result was poor, and...