Hello,
I have a P Bass with 'Fender Original 62' pick-ups and I decided to swap them for Bartolini 8Ss.
I noticed however that the Fender pick-ups have a whole stand-alone shield plate with foam under them already.
This plate+foam seems to be too high for the Barts, which are larger pickups...
Hey all,
I have posted this question before in the wrong sub-forum, for which I apologize..
Hope someone can give me an answer on my question!
A few years ago I bought a Fender Am Standard Pbass, with the Custom Shop 62 pickup in it.
I have never really liked the pickup a lot, too much...
For this song, I use a Tahitian Ukulele,a bow, a double bass and a bass drum sound.
I record my loops in real time on the Reaper software with the Super8Looper.
Greetings. The neck pickup in my 4004cii has never worked. Zero output from neck pickup, but everything else works fine. The guitar was purchased new from MusiciansFriend and given to me as a gift in ~2014. It remains unmodified. I noticed the problem back then but, shrugged it off, as this is...
This is a relisting; I have been testing and selling from a box of upright pickups, and this one seems to be dead but is repairable. It is being offered at a price that will cover my sending it to you + the PayPal fee I lose with the transaction, + a bit for a beverage for me.
Here is the...
This is a relisting; I have been testing and selling from a box of upright pickups, and this one seems to be dead but is repairable. It is being offered at a price that will cover my sending it to you + the PayPal fee I lose with the transaction, + a bit for a beverage for me.
Here is the...
(This is a relisting after all testing confirmed this works fine.)
The Realist “Copperhead” acoustic transducer was designed by Ned Steinberger in collaboration with David Gage. This original unit has 1/4“ input jack, and has a label with “R0467” printed on it.
“…placing the transducer under...
(This is a relisting after all testing confirmed this works fine.)
The Realist “Copperhead” acoustic transducer was designed by Ned Steinberger in collaboration with David Gage. This original unit has 1/4“ input jack, and has a label with “R0467” printed on it.
“…placing the transducer under...
(This is a relisting after all testing confirmed this works fine.)
The Fishman BP-100 Acoustic Bass Pickup is a bridge-mounted, dual-element, piezo-ceramic transducer pickup that installs in minutes using the two felted u-clips for bridge installation. Delivers deep sustained pizz tone and fast...
(This is a relisting after all testing confirmed this works fine.)
The Fishman BP-100 Acoustic Bass Pickup is a bridge-mounted, dual-element, piezo-ceramic transducer pickup that installs in minutes using the two felted u-clips for bridge installation. Delivers deep sustained pizz tone and fast...
(This is relisted; the rca patch cable shown is not included in this sale.)
Underwood 2-element transducer pickup. Mounts in the bridge wing slots.
If you are not familiar, there is only this one model, with two different jack versions: 1/4” jack or RCA jack (the lighter option). I recommend...
(This is relisted; the rca patch cable shown is not included in this sale.)
Underwood 2-element transducer pickup. Mounts in the bridge wing slots.
If you are not familiar, there is only this one model, with two different jack versions: 1/4” jack or RCA jack (the lighter option). I recommend...
(This pickup is relisted; the initial buyer didn't realize the patch cable connector was bad, and returned the entire pickup. So, no patch cable is included in this sale.)
This Acoustic Bass system is an early Stephan Schertler’s original Bridge-mounted electrostatic bridge-mounted transducer...
(This pickup is relisted; the initial buyer didn't realize the patch cable connector was bad, and returned the entire pickup. So, no patch cable is included in this sale.)
This Acoustic Bass system is an early Stephan Schertler’s original Bridge-mounted electrostatic bridge-mounted transducer...
This Acoustic Bass system is an early Stephan Schertler’s original Bridge-mounted electrostatic bridge-mounted transducer STAT-B system. Effectively reproduces the complex tone of the double bass and also works with any bass amplifier. Ideal in applications where high volume levels must not...
This Acoustic Bass system is an early Stephan Schertler’s original Bridge-mounted electrostatic bridge-mounted transducer STAT-B system. Effectively reproduces the complex tone of the double bass and also works with any bass amplifier. Ideal in applications where high volume levels must not...
PUTW (Pick-up The World) dual-element transducer system uses thin polymer film material for their pickup elements. One sensor fits under the bass bridge foot. A second, smaller sensor is attached to the face of the bridge, and provides a completely adjustable range of dynamic sensitivity and...
PUTW (Pick-up The World) dual-element transducer system uses thin polymer film material for their pickup elements. One sensor fits under the bass bridge foot. A second, smaller sensor is attached to the face of the bridge, and provides a completely adjustable range of dynamic sensitivity and...
Underwood 2-element transducer pickup. Mounts in the bridge wing slots.
If you are not familiar, there is only this one model, with two different jack versions: 1/4” jack or RCA jack. I'm selling one of each type.
Read more about it from real users, at this link:
Underwood Pickup Club...
Underwood 2-element transducer pickup. Mounts in the bridge wing slots.
If you are not familiar, there is only this one model, with two different jack versions: 1/4” jack or RCA jack. I'm selling one of each type.
Read more about it from real users, at this link:
Underwood Pickup Club...
The Fishman BP-100 Acoustic Bass Pickup is a bridge-mounted, dual-element, piezo-ceramic transducer pickup that installs in minutes using the two felted u-clips for bridge installation. Delivers deep sustained pizz tone and fast articulation with emphasized direct string sound. An impedance...
The Fishman BP-100 Acoustic Bass Pickup is a bridge-mounted, dual-element, piezo-ceramic transducer pickup that installs in minutes using the two felted u-clips for bridge installation. Delivers deep sustained pizz tone and fast articulation with emphasized direct string sound. An impedance...
Ischell “contact mic” pickup (not with the additional piezo pickup). It conveys the sound of a microphone, natural and faithful, with the feedback resistance of a pickup. For double bass (solid wood soundboard only). Uses Phantom power; does not have the 9v battery option. 1/4” balanced TRS...
Ischell “contact mic” pickup (not with the additional piezo pickup). It conveys the sound of a microphone, natural and faithful, with the feedback resistance of a pickup. For double bass (solid wood soundboard only). Uses Phantom power; does not have the 9v battery option. 1/4” balanced TRS...
A fantastic double bass, served me well throughout college. Always gently used, well cared for.
Samuel Shen designed the upright bass with a carved spruce top for warm and full sound, and maple veneer back and ribs for durability and a long lifetime.
Purchased in 2013 from Potters Violins in...
A fantastic double bass, served me well throughout college. Always gently used, well cared for.
Samuel Shen designed the upright bass with a carved spruce top for warm and full sound, and maple veneer back and ribs for durability and a long lifetime.
Purchased in 2013 from Potters Violins in...