Enjoy the benefits of a premium membership!
Upgrade Account
-
TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
Avatar Cabs?
- Thread starter bassrocker521
- Start date
I've got the Neo, and have ran 6 different basses along with two different heads...
It takes on the sound of the head and bass that you're playing through. A great buy for sure. I'm about to switch to 2x12 powerhouse cab to pair with my PH15, but I fully intend on holding onto the NEO.
It takes on the sound of the head and bass that you're playing through. A great buy for sure. I'm about to switch to 2x12 powerhouse cab to pair with my PH15, but I fully intend on holding onto the NEO.
Once I get the cash, of course.
And I'll need some other place to play. I'm in a dorm room. haha.
Anyone know the sensitivity dB rating on these cabs? I checked avatar website for specs but they didn't have them.
I had an Avatar 410 for awhile and used it one tour, but it way distorted way too much with an Ashdown 500 EVOII. I sold it to a student who runs a GK Backline 600 through it and it sounds great, so I can see it doing well with solid state heads.
You can get the specs for the Eminence Deltalite on the Eminence site, but Dave has his custom made. The most significant difference in specs from the standard Deltalite is that the custom Avatar driver has an extended Xmax. There is information somewhere here on TB w/ what it is exactly.
What you need to do is go to a speaker site like,
www.usspeaker.com and lookup the driver your interested in,
sensitivity-dB specs can be found there..
I love the colored tolex. I don't need another cab at all but I might just get one just for the colors.blue tolex is now available
[Invalid or Expired Link Removed]
I am so getting a 210 and 212 when I get my tax retun!!
I have seen varying views about running cabs over their rms. If I run the 210+212 (both 8ohms) it will be 1000w capacity. I want to run a carvin bx1200 into that. Will it be dangerous for the cabs if I run it bridged (1200W @4ohms) or will it just have some headroom? I could also get 4 ohm cabs and run them stereo with 400W each.
Any thoughts?
CB
I have seen varying views about running cabs over their rms. If I run the 210+212 (both 8ohms) it will be 1000w capacity. I want to run a carvin bx1200 into that. Will it be dangerous for the cabs if I run it bridged (1200W @4ohms) or will it just have some headroom? I could also get 4 ohm cabs and run them stereo with 400W each.
Any thoughts?
CB
i think you would be fine as long as you use your ears, if you hear any stress, back off.... I rock the Red tolex on my B212 Neo, it sure is purty
I think your like the Avatars. Mine has the lowend thump I carave and can push some serious air, all while at knee cap level. They'll never miss yoour rig with that blue tolex....
