• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Birdsong Club

Status
Not open for further replies.
Hello,
Just curious, I have had a Fender Mustang and Musicmaster bass and the problem I had was that it was difficult to get them to be be heard through the other instruments. I now use a Fender Jazz but was wondering how the Birdsong short scale performs in gigs.
Thanks

Any time I've had trouble being heard with either Birdsong, it was my own fault for EQing poorly or for running with a heavy fuzz on when there were 3 distorted guitars running at the same time. Beyond that, it comes through loud and clear.
 
c107b.jpg


Finished routing! Now sanding! Almost done! Hurray!

It'll be da best XMas present!
 
Adam, that is sweet...

After my financial aid snafu put my Corto-buying on hiatus, I think I am getting close... I sold a Euphonium over thanksgiving and almost have my Dad payed off... I am selling a Bass Clarinet and getting about $450 from the state of OR (tax "kicker" refund) this month, so i may be able to put that deposit down and get Scott started on it (though it looks like he takes a break til Mid January... I guess he deserves it;)) Christmas present for me... Keeping fingers crossed...
 
I talked to Scott and the gang once or twice before ordering, and I found out that Scott is very accommodating with the deposit; when I actually ordered, I considered payment in fourths. But in the end I decided to be less of a burden on my parents too (lol) and go for half-and-half. They really are some of the nicest people I have never seen in person.

Seeing what everyone is saying with Birdsongs, my soon-to-be-new bass is for keeps. No matter what you order, I think you won't be disappointed.
 
I talked to Scott and the gang once or twice before ordering, and I found out that Scott is very accommodating with the deposit; when I actually ordered, I considered payment in fourths. But in the end I decided to be less of a burden on my parents too (lol) and go for half-and-half. They really are some of the nicest people I have never seen in person.

Seeing what everyone is saying with Birdsongs, my soon-to-be-new bass is for keeps. No matter what you order, I think you won't be disappointed.
+1,000,000 couldnt have say it better!!! Scott,Jamie and rest of group are fantastic!!!:bassist:
c107b.jpg


Finished routing! Now sanding! Almost done! Hurray!

It'll be da best XMas present!

Cant wait to see final product !!! Congrads!!!!:D
 
I talked to Scott and the gang once or twice before ordering, and I found out that Scott is very accommodating with the deposit; when I actually ordered, I considered payment in fourths. But in the end I decided to be less of a burden on my parents too (lol) and go for half-and-half. They really are some of the nicest people I have never seen in person.

Seeing what everyone is saying with Birdsongs, my soon-to-be-new bass is for keeps. No matter what you order, I think you won't be disappointed.

Yeah... They were super-nice to me n the kids when we stopped by there over the summer... Gave the kids a sample of bloodwood and purple heart... answered all of our questions, let me play, look, touch... and you're right... very accomodating... I want to get the first half out in one hunk, then do installments if I need... Every instrument they make is so beautiful... even the basic mahogoney cortos are one of a kind by their very nature... Man... I am getting excited again...
 
:hyper::hyper::hyper::hyper::hyper::hyper:
HA HA HA HA HA HA HA!!!!!!!!!!!!!!!

Deposit down!.... I am officially in the que. I can't shut up about it... My kids at school asked what it looked like, but I tell em "can;t show you... there ain't another like it..."

WOOHOO!!!

AWESOME - Congratulations. I know it's been a long time in coming. So freakin' cool.

If you are ANYTHING like me, you won't shut up about it. To anyone. Hell, I started a myspace blog JUST so I could jabber about my first Birdsong to a non-existent audience and bore my friends and loved ones at least a tiny bit less. (wish it had worked better)

when you're ready to share details, please do - although who knows...you might be like me and change your mind a half dozen times or more while you're waiting.
 
AWESOME - Congratulations. I know it's been a long time in coming. So freakin' cool.

If you are ANYTHING like me, you won't shut up about it. To anyone. Hell, I started a myspace blog JUST so I could jabber about my first Birdsong to a non-existent audience and bore my friends and loved ones at least a tiny bit less. (wish it had worked better)

when you're ready to share details, please do - although who knows...you might be like me and change your mind a half dozen times or more while you're waiting.

Hmmm welll... I did not want to be rude and a bore, but since you insist:D: After much discussion with Scott over the last few months about my Corto (was tempted to go for a 5er, but that will be the next one...), and great suggestions from him (he IS the artist here after all...) this is what we came up with... this is what I sent him today:

My Cortobass:

-Wild Walnut center, 2 Ebony stringers, and Sycamore wings with black hardware ,
-2 pickup Cortobass
-Fretted…
-Small thumbrest
-Supremo headstock
-I assume “rear route” means your knobs go in through the back? I like the look of no plate on front… Like to see as much of the wood as possible… Question: Can the “chicken head” knob on the Varitone be substituted for a matching ebony knob, or (even better) a matching knob with a dot or line or tick or other uniqueness that’d allow me to see which way it is pointing? I just don’t care for look of the “chicken heads”…
-And every piece of art should be signed, so I’d take the “custom built plaque”.

That is what I have in mind. I assume there will be other details you will need to ask about. If in the process you ever thought “it would be so great/cool/gnarley/phat/keen/neato/beautiful if we did “X” instead”, I would want you to tell me…


Maybe one day, I will be good enough to play it... lol...

Merry Christmas to me...
 
-I assume “rear route” means your knobs go in through the back? I like the look of no plate on front… Like to see as much of the wood as possible… Question: Can the “chicken head” knob on the Varitone be substituted for a matching ebony knob, or (even better) a matching knob with a dot or line or tick or other uniqueness that’d allow me to see which way it is pointing? I just don’t care for look of the “chicken heads”…

You're correct on the rear route. Instead of the knobs being attached to a control plate, they're attached to the body. I had my Sadhana rear routed for the same reason of showing as much wood as possible.

When I was discussing the design of my bass with Scott, I had questioned about using an wood knob in place of the chicken head knob. His response was that he liked the chicken head knob because it gives a clear indication of where you are on the varitone and being black it will match the ebony knobs.

I had thought to ask Scott about using knobs like the ones that they make at http://www.thgknobs.com/, but it wasn't that important to me so I never got around to it.

I've seen custom knobs on other Birdsongs so definitely ask Scott about doing that.

It sounds like your bass will be a real looker. Don't forget to post pics when you get them! :hyper:
 
I like flat-top metal knobs instead of chicken-heads. Scott's response - "more chicken heads for me."

Bobby - it sounds GLORIOUS. I like the look of the control plates, but with the wood choices you're going with, it would be a waste. Consider the "bbox varitone" over "standard varitone" - what can I say...I'm a huge sucker for the BBox varitone that is in my Cortofusion.

Having one of each headstock - the Supremo is TOTALLY worth it.

freakin' spectacular
 
I like flat-top metal knobs instead of chicken-heads. Scott's response - "more chicken heads for me."

Bobby - it sounds GLORIOUS. I like the look of the control plates, but with the wood choices you're going with, it would be a waste. Consider the "bbox varitone" over "standard varitone" - what can I say...I'm a huge sucker for the BBox varitone that is in my Cortofusion.

Having one of each headstock - the Supremo is TOTALLY worth it.

freakin' spectacular

I kinda knew what I wanted except what wood to make the body out of... I wanted something with personality, something different and unique... I was thinking something like one piece of something (I really liked those pecan cortos)... I asked Scott if he had any suggestions... He suggested that walnut ebony sycamore combo, and at first I thought "myeh..."... But then after a while I started to feel that and then could not get it outta my mind:cool:!!! So then that was it, man... I am so stoked...
 
Status
Not open for further replies.