• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

G&L Club Part 7

I don't think one is better just different. McCartney played a short scale, Hofner, and a long scale Rick. Bill Wyman also played both.

Exactly. Doesn't really matter. Choose the bass that sounds right and don't worry about what scale it is. Don't limit your options to available short scales as you may find there's a much better bass *for YOU* that isn't short.

All I'm saying.
 
Now, on my newer L-1505 on the small metal plate that bares the serial number G&L proudly includes "The birthplace of bolt-on" - you know because G&L's are still made at the original Fender factory. Long live G&L.

The "Birthplace of Bolt-on" is homage to Leo.

The instruments are made close by the original locations of Leo's businesses, but not the same location (they're about 1.5 miles apart). However, all are in Fullerton; from his original radio shop to the guitar/bass factories.

Google Maps:

The original Fender location was near this intersection

G&L/BBE is located here. This is also where the pre-Ernie Ball Musicman instruments were built.

Ken...
 
Hello. I'd like to add my entry into the G&L club. Just got my new L2000 today!

20140413_185046.jpg


20140413_180035.jpg


20140413_181607.jpg
 
Well, I have owned several G&L basses, but I'm now returning to the club soon! Placed an order for a MJ-4 from Rocketmusic today, and it's going to be something like this one:

2w4wMjl.jpg


Blackburst with binding, quartersawn ebony fretless neck with ghostlines, and matching headstock... Can't wait! :hyper:
 
I'm back in the club! I just bought a prototype M2000 Tribute from someone here on TB. It doesn't have the black binding stripe that the other GTB's have and doesn't say where it was made on the back of the headstock.

20140315_140431.jpg
20140315_14004_edit_1394910320096.jpg

20140315_140209.jpg
20140315_152806.jpg


Unfortunately it got damaged in shipping

20140415_062352_zpsbc9809dc.jpg


At first I thought I would either fill it with nail polish, or use a white auto touch up pen for color and fill it in with super glue. The problem with this is that the chip is long and is on two different surfaces, so the super glue would run out.

I chose instead to fill the chip with "white" wood filler and then sand it down flush with the surrounding finish. I used successive grits of micromesh and now it's pretty darn smooth.

20140415_202554_zps9c7a8293.jpg


I'm going to repaint the whole thing in this color

Racer67CS1_2.jpg
Racer67CS1_3.jpg
Racer67CS1_4.jpg
Racer67CS1_5.jpg
Racer67CS1_8.jpg


I wouldn't have the pin stripes or black pickguard, but I still think it would look smokin!

I think I'm going to use this logo on the headstock

GampLBassclear_zps27022940.jpg


or should I use this one?

GampLBassSCREENlogos_zps2cc9d706.jpg
 
Hi,
I've been wondering what's the finish on this bass, it looks beautiful but I can't seem to find the color on the G&L's website.
Invalid Link Removed
Cheers,

Looks like blueburst to me. I've seen a lot of variation in blueburst - some almost look totally black, some almost look totally blue. And if it's older/old enough it can start fading to blue-green.
 
My first G&L was an 85 L1000
I now have 2 L 2500s one frettless
Your 5er is very cool.
It took me a while to switch to 5 after 40+ Playing 4 but I can switch back and forth now. Mostly play my 5s. I have put up pics before if you want me to repost I will. Don't want to grab your post.
The blue is a bute!
Rock on!