• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Genzler Amplification Club

I am finding that my BA 410-3 is a very efficient cab.. In the right room, It will get to gig volume with very little MASTER VOL . The other day i only had 9:30 on the vol knob , nearly flat EQ, (Slight bass boost, slight Contour A, was rockin... MG800 is a mighty fine amp.. Yes I has PA support too... But the stage was covered with minimal Master VOL..
 
I am finding that my BA 410-3 is a very efficient cab.. In the right room, It will get to gig volume with very little MASTER VOL . The other day i only had 9:30 on the vol knob , nearly flat EQ, (Slight bass boost, slight Contour A, was rockin... MG800 is a mighty fine amp.. Yes I has PA support too... But the stage was covered with minimal Master VOL..

Are you still preferring the BA-410 to the MG212?
 
For me the 410-3 is doing more of what i prefer and sorta need right now. . I think it gets ferociously loud for a 410 cab too..
I may go back to teh 212 one day. But the 410 sounds great, is full sounding , punchy and looks great..
I used to HATE 410 cabs.. But the Array has changed that for me. I have even tried teh array on its side so teh 3" speakers are horizontal.. . Seems to work great when i was up real tight and on top of my cab.. .
Im sorta the type that keeps using a certain piece of gear for years.. i don't gear flip so much.. I am a gear head though. .But when i find something that works i stay with it. That way i am more consistent.
I still love my old Uber 115. I just dont use it anymore. But its a keeper.. Would love to see a Genzler 115 array. that goes DEEP with a low F3 with punch and smooth up to 10k maybe one day


Are you still preferring the BA-410 to the MG212?
 
I've been looking for a used 12-3 slant but am only finding the straights (some at real good prices). I have the 350 combo and one 12-3 straight. For those with two 12-3's straights do you wish you had a 12 slant? Am wanting to put a 12 slant on the bottom, straight in the middle, then the combo on top.
 
I’m ok without the slant (I run two straights) mostly because those cabs throw so well I never have a hard time hearing myself
Same here. I guess it could be a matter of not knowing what I'm missing. I certainly would love to try the slant with a straight just to hear it. But right now it's probably best that I don't go looking for ways to trigger any GAS!
 
maybe I am a bit GASsy, I just so want a slant... Maybe just so that the stack looks good in my basement (so sad)... Used to gig a ton years ago but now with family and kids the opportunities are few and far in between. Even then they are small shows where I don't need my Mesa rig (my GK combo would then see the stage) and at times backline is provided... The later is convenient but also makes me sad as I have the desire to crank the Genzler 350 to11 . Well, some rumblings of a prior metal band are happening, maybe a couple decent shows will result this year.
 
I'd love to get a third cab. And if I do it will be an SLT but to run all three I'd also have to get the Magellan 800. Until then I'm perfectly happy with my Shuttle 9.0 and 2 BA-12-3's. If I need to get louder than that, well that's what the PA is for.
 
I've been looking for a used 12-3 slant but am only finding the straights (some at real good prices). I have the 350 combo and one 12-3 straight. For those with two 12-3's straights do you wish you had a 12 slant? Am wanting to put a 12 slant on the bottom, straight in the middle, then the combo on top.

I definitely have been thinking about getting a third BA12-3, in which case I would definitely get the SLT. I'm pretty sure it will happen one of these days.
 
  • Like
Reactions: tombowlus
I definitely have been thinking about getting a third BA12-3, in which case I would definitely get the SLT. I'm pretty sure it will happen one of these days.

3 would be such a massive stack! I have toyed with the idea of adding a BA210-3 and doing a little mixing and matching. My fall back is adding a MG350 combo for going to rehearsals, practice room, and there a couple of small rooms that I play where even a single 12-3 is too much. My thought is the single 10 on a top of a 12 might be a good punchy combo.
 
3 seems like overkill to me. I know it looks cool and all, but I can't imagine a gig that would require more than a pair. At that point shouldn't FOH support come into play? I had 1 and an 800 before I went to the combo and it was loud.
 
  • Like
Reactions: revroy
3 seems like overkill to me. I know it looks cool and all, but I can't imagine a gig that would require more than a pair. At that point shouldn't FOH support come into play? I had 1 and an 800 before I went to the combo and it was loud.

Kinda like bringing an SVT to a bar gig.
Not necessary but it does still happen.
 
  • Like
Reactions: Loring and gclark51
You guys are being way too practical- do you need 300+ hp in your car/truck? Do you need a 4k tv? 15 year whisk(e)y? Boutique basses? No, but they sure are nice to have... :D

The thing I like best about the 3 stack is it’s up closer to ear level, and the punch in the chest you get from it. It’s very inspiring. But to each their own...

For the record, I have 2 straight and one slant...
45F18068-69D4-4921-ACBA-AF6E72313FD7.jpeg
 

Latest posts