Genzler Amplification Club

[PaulS]

So what @Fred312b said was right. Somehow I flipped the ohm switch to the wrong spot. Must have been when I was putting it in the bag. I hope this didn’t cause any harm to the cabs or the head. I’m not very knowledgeable about that sort of stuff.

 

[Loring]

So what @Fred312b said was right. Somehow I flipped the ohm switch to the wrong spot. Must have been when I was putting it in the bag. I hope this didn’t cause any harm to the cabs or the head. I’m not very knowledgeable about that sort of stuff.

It won’t hurt this way but you’re getting less power to the cabs....

The other way however - where you’re running 3 cabs and don’t switch it across is not recommended...

 

[Djadja]

So what @Fred312b said was right. Somehow I flipped the ohm switch to the wrong spot. Must have been when I was putting it in the bag. I hope this didn’t cause any harm to the cabs or the head. I’m not very knowledgeable about that sort of stuff.

So... inquiring minds want to know. Does it now sound as loud as you expected?

 

[PaulS]

That’s good to know @Loring thank you
@revroy i will find out Saturday when we jam, but I’m sure it will be fine. I mean it sounded fine as it was, but I was worried since it seemed I was going way higher with the volume than everyone normally spoke about.

 

[MattLplaysBass]

So what @Fred312b said was right. Somehow I flipped the ohm switch to the wrong spot. Must have been when I was putting it in the bag. I hope this didn’t cause any harm to the cabs or the head. I’m not very knowledgeable about that sort of stuff.

Even a broken clock is right twice a day... glad it was a simple (and free) fix. Enjoy your loud amp

 

[PaulS]

Lol thank you sir

 

[bebass]

I know I just posted my new 212T the other day, but my new to me Magellan 350 and Reverend Triad also arrived this week. One happy TB member here!
View attachment 3549269

That is a nice looking Reverend you have there. How are you liking it? I almost bought one but chickened out at the last second, as I have never played one. I bet it sounds great with your Genzler rig.

 

[Lowandfat]

To all the Genzler fans, check out my Grumble thread in this forum! A bit excited about my frankenrig build, to say the least.

 

[Sodbuster]

Thank you bebass. so far I am loving it. The roasted maple neck is fantastic, and the versatility is an even bigger positive. Light, well balanced, fast and comfortable neck, and dead quiet with the bass bomb pickups. It sounds killer through my Genzler gear. I coulgn't be happier, honeymoon period or not. thank you for the compliment.

 

[Yogi Bear]

I honor of the upcoming Halloween holiday, and many thanks to Jeff @Genzler I present my Franken-Genzler rig. I turned off the tweeter in the 12 and couldn't be happier with the sound. Incredibly full yet articulate.

Those with mismatched cab OCD, or the mismatched drivers police, may want to avert their eyes.

 

[Holdsg]

nothing scary about that to me.

 

[davel66]

I honor of the upcoming Halloween holiday, and many thanks to Jeff @Genzler I present my Franken-Genzler rig. I turned off the tweeter in the 12 and couldn't be happier with the sound. Incredibly full yet articulate.

Those with mismatched cab OCD, or the mismatched drivers police, may want to avert their eyes.

View attachment 3555395

I’m much more concerned about the mixing of a P and a J pickup on the same instrument. What’s up with that!



... Just kidding my main axe these days is a Fender P/J Boner bass.

 

[SteveC]

If I can't sell my BA10-2 I may try this with my MG12T. Although I haven't played a gig where I need more than a single cab can deliver. My 350/12 combo is ridiculously loud.

 

[Todd Larson]

Greetings, This may have been covered elsewhere, if so, pardon my post.
Curious if my Magellan 350 (or the 800) has a HPF built into the circuit? It definitely sounds amazing as is, but my g.a.s. is always leading me down some rabbit hole. I'm looking at the Broughton AOHPF:https://www.broughtonaudio.com/product-page/always-on-high-pass-filter and [sfx] Thumpinator:[sfx]:micro-thumpinator , both have solid reviews. Anyone with experience in this area? Thanks in advance!

 

[Jeff Genzler]

Greetings, This may have been covered elsewhere, if so, pardon my post.
Curious if my Magellan 350 (or the 800) has a HPF built into the circuit? It definitely sounds amazing as is, but my g.a.s. is always leading me down some rabbit hole. I'm looking at the Broughton AOHPF:https://www.broughtonaudio.com/product-page/always-on-high-pass-filter and [sfx] Thumpinator:[sfx]:micro-thumpinator , both have solid reviews. Anyone with experience in this area? Thanks in advance!

Hello Todd, Yes we do use a preset HPF on both amps, using a step slope circuit set at just under 30 Hz. Thanks for using our gear.

 

[Todd Larson]

Hello Todd, Yes we do use a preset HPF on both amps, using a step slope circuit set at just under 30 Hz. Thanks for using our gear.

Fantastic, Thanks Jeff! Wonderful to hear from you on Talkbass. Keep making us sound great!

 

[Yogi Bear]

If I can't sell my BA10-2 I may try this with my MG12T. Although I haven't played a gig where I need more than a single cab can deliver. My 350/12 combo is ridiculously loud.

It really is a great pairing! For me it was never a volume issue, these MG350s are plenty loud even at 8ohms. I personally like the sound of multiple drivers. There's an added fullness I don't hear with some single speaker applications.

 

[Joeykun]

My rig for tonight. It needs a BA210-3 SLT!

 

[Loring]

My rig for tonight. It needs a BA210-3 SLT!

View attachment 3557305

How do you like that bass/guitar stand...?

I have the Hercules rack for 5 basses and while it works well - it doesn’t pack and transport all that well.

 

[Joeykun]

I’ve had it for 10 years and lasts on the road. The best stand for my Basses!!!