• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Genzler Amplification Club

Curious where you ran your input/trim, and pad on or off. With one active bass I used this weekend I was probably around noon, pad on and still had the master only around 9. And even controlled that much it was still very loud. I can't imagine getting to noon or beyond in nearly any situation without risking speaker damage.
I have the input volume at 11, no pad. Normally master is at 9, but on the bandstand with all open air (no walls) master at noon felt right, even though that was a first. Nothing but beauty.
 
So for most of the live players that tour, an have the magellan head. Are you guys using the DI out of the head most of the time? or using your own pedal? Jw what most do I’m finally starting to get to where I’m messing with tone a little now I have my cabs an all that figured. About to buy my first preamp pedal. No DI but I’ve used or just messed with the DI from Magellan an I guess Idk how it compares to a lot of pedals an other heads DI, but it sounded really good on scarlet interface and then just hooking it up to Pa speakers to test DI it sounded really good. But as mentioned I don’t have a lot of experience with DI an then getting “the tone”’from the stage to FOH. I’ve been told it’s a little more challenging with bass to accomplish.
 
Input at noon; I NEVER use a pad switch with any bass on any amp. You lose a lot of punch and frequency response IME. A keyboard, yes.
Not necessarily, it depends entirely on how it’s accomplished.
 
I NEVER use a pad switch with any bass on any amp. You lose a lot of punch and frequency response IME. A keyboard, yes.

That had always been my experience as well. That said, on the MG800 I did find that to be far less the case then say any of my GK classs D amps. First time I used a pad with one hotter bass and was happy with it. I will have an opportunity this weekend to experiment with all this some more but I have a better baseline from the info offered here.
 
My OCD wonders about the BA15-3 Series 2 vs. the original. Anyone have any experience? I’ve read the tens are the most different in the new series and it is DEFINITELY my experience. The BA10-3 series 2 sounds waaaaaaaaaaay different than the original.

I never noticed a huge difference between the two series with the BA15-3. Yes, a little more high end on top with Series 2. But, both deliver the deep low-end punch equally. Agree the 10’s are a different story.
IMG_0909.jpeg
 
So for most of the live players that tour, an have the magellan head. Are you guys using the DI out of the head most of the time? or using your own pedal? Jw what most do I’m finally starting to get to where I’m messing with tone a little now I have my cabs an all that figured. About to buy my first preamp pedal. No DI but I’ve used or just messed with the DI from Magellan an I guess Idk how it compares to a lot of pedals an other heads DI, but it sounded really good on scarlet interface and then just hooking it up to Pa speakers to test DI it sounded really good. But as mentioned I don’t have a lot of experience with DI a then getting “the tone”’from the stage to FOH. I’ve been told it’s a little more challenging with bass to accomplish.
I always use my di and post eq - once sound check is done - no adjustments to the eq (except to use the drive channel which is at unity gain compared to the clean channel)

every sound man thus far has had nothing but positive comments (after that fact)
 
So for most of the live players that tour, an have the magellan head. Are you guys using the DI out of the head most of the time? or using your own pedal? Jw what most do I’m finally starting to get to where I’m messing with tone a little now I have my cabs an all that figured. About to buy my first preamp pedal. No DI but I’ve used or just messed with the DI from Magellan an I guess Idk how it compares to a lot of pedals an other heads DI, but it sounded really good on scarlet interface and then just hooking it up to Pa speakers to test DI it sounded really good. But as mentioned I don’t have a lot of experience with DI a then getting “the tone”’from the stage to FOH. I’ve been told it’s a little more challenging with bass to accomplish.

I use the Magellan DI with confidence at every show. I use Pre EQ, Mic level and of the 1000s of shows I’ve played, not one complaint from FOH.

I put my pedalboard directly into the input of the Magellan and my tone is solid to the FOH and the Bass Array cabs.
IMG_1828.jpeg
 
So for most of the live players that tour, an have the magellan head. Are you guys using the DI out of the head most of the time? or using your own pedal?

I always use the MG350 DIs (I have two), although for one show I used a Khan DI to see how that sounded with a Jazz bass, rather than the usual Starfire. It was nice, but really the Magellan DIs are wonderful and I've had nothing but praise from all the engineers who have used them. I send it post EQ, mic level, no pad. I love these amps!