GK MB200 Not working

[creis2]

Just a standard 1+,1- 4 pole speakon (which I hope does not have a loose wire in one connector or the other?).

When I first plugged it in, I used a speakon to 1/4" jack into my Ampeg 210av, at this point it cut out after 2 minutes.

Right now I'm going into a GK 212 and using a Live Wire Elite 2 x 12 ga speakon cables. The end say Neutrik NL2FC then says +1.

Not sure what any of this means, I'm kind of new to the speakon thing.

Cables are good, they work fine when I use another head.

 

[B-string]

2 pole connectors are supposed to be compatible with the 4 pole that G-K uses. If they work with another amp then you should be good.

 

[creis2]

2 pole connectors are supposed to be compatible with the 4 pole that G-K uses. If they work with another amp then you should be good.

Thanks, just wanted to check. It was working for a few mins, I just want to cover all of my grounds before I ship it across country.

 

[B-string]

Always pays to double check (including the speakon to 1/4" that the amp failed with).

 

[creis2]

I figure I would give the results, in case anyone has a similar issue.

According to GK, the speakon connector was broken. There's only one on the unit, so I wasn't able to figure this one out.

Thanks again.

 

[craig.p]

Thank you for posting the resolution. Wish more people did this.

 

[B-string]

I figure I would give the results, in case anyone has a similar issue.

According to GK, the speakon connector was broken. There's only one on the unit, so I wasn't able to figure this one out.

Thanks again.

Thank you for posting the resolution. Wish more people did this.

+1 Thank you!

 

[Joe Louvar]

+3, thank you Craig.