215d cabs questions and black widows (the old 1504's).. am refurbishing one as we speak and need info on port mods, dampening and wiring..
I added a few pieces of wood around the vents (all sides but the bottom since the rectangular ports are only about an inch away from the edge) vent(s) length is approx. 2"
Slots are 11" x 3" (each chamber) and also wondering if i should shrink them a little for some drop C (metal) usage?
Wondering if 2 older 1504's (4ohm) wired in series is as good as 2 1502's wired parallel?
Is there any benefit or detriment to putting a cross vent hole(s) between chambers?
just tried this thing this eve, and one of them (the BW 1504's) has a slight buzz, does anyone know what the difference is between the 1504 and the newer 150? DT 4ohm black widows, (i am on the hunt for a replacement now), not sure what the DT means pp
I added a few pieces of wood around the vents (all sides but the bottom since the rectangular ports are only about an inch away from the edge) vent(s) length is approx. 2"
Slots are 11" x 3" (each chamber) and also wondering if i should shrink them a little for some drop C (metal) usage?
Wondering if 2 older 1504's (4ohm) wired in series is as good as 2 1502's wired parallel?
Is there any benefit or detriment to putting a cross vent hole(s) between chambers?
just tried this thing this eve, and one of them (the BW 1504's) has a slight buzz, does anyone know what the difference is between the 1504 and the newer 150? DT 4ohm black widows, (i am on the hunt for a replacement now), not sure what the DT means pp
