• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

How much to replace your board?

Zoom B3 - $100
MXR Bass Compressor $125
MXR Bass Env Filter. $100
Future Impact V3. $250
Darkglass Vintage Ultra DI. $200
Whirlwind 10 band EQ. $310
Pedaltrain-1 w Hardcase. $100
Chinese Power supply. $ 20
Lekato Wireless. $ 45

Grand Total $ 1250….not bad.
 
  • Like
Reactions: TaylorJ
L6 hx stomp 599.99
TCX3 349.99
SA EQ2 269.99
2Notes opus 289.99
MXR Dyna comp 122.99-215.99
ISP Decimator 149.99
Hotone midi control 106.002(2x)
Voodoo labs PP3 279.99

2274.93-2367.93

if my pedal board were to evaporate tomorrow it'd just be replaced by an HX-XL, eq2 and opus and someother midi controller.
Sounds like a killer board right here!
 
  • Like
Reactions: ghiggin1079
My small board cost €1050, with cables, power, and homemade board.

2025 februar.jpg


Bigger one that I now use more for guitar than for bass was more expensive...€1150 (with Woodoo Lab 4x4 and cables), but most of the pedals was bought used. Just checked the prices of new components, and today it would cost €1550.

1739958610935.jpeg
 
  • Like
Reactions: TaylorJ
I think it’s key to differentiate between full retail price and what it would cost second hand (my preferred way to go)

And of course the hidden cost: time to locate or commission the pedals!

Overall I would say about €1500
But the time and pain= unmeasurable
Funny thing is I never planned to spend this and I’ve never spend so much on a bass!
EC3869F7-1199-48B4-9F30-AEF2499695B2.jpeg
 
None of my effect racks are more than 10" deep or weigh more than 20lbs., and I don't give a rip about cabinet overhang so I don't need to buy a big cab just for "the look.' And my primary amp is already rack mounted, so for me the biggest downside is how expensive decent rack enclosures for my DIY builds are. But in your case it would be a pretty substantial format jump, I reckon. The last time I did rack effects in earnest this wasn't even the whole schmear:

View attachment 7155620
That is a THING! So many goals right there
 
  • Like
Reactions: Passinwind
Gotta say - my pedalboard is comparatively frugal!
1739977675452.jpeg

Considering that most things were purchased used, and 4 of the pedals (3 overdrives and the delay) were ones that I built?
My actual spend was probably more like $700...

But here are the retail replacement prices:
Lustithand Alma I $270
Overdrive 3x $80 $240
Line 6 G30 wireless $230
Turbo Tuner ST-200 $140
BBE power supply $120
Pedal Board $100
Broughton HPF $80
Delay $80
Flat patch Cables $30
Neoprene washers to secure knobs in position $5
Total $1,295

I also have a POD Go for IEM gigs - those are a bargain at $399 now.
 
  • Like
Reactions: TaylorJ
Some nice pedals in that list, especially the SushiBox stuff! Mums the word on telling anyone. I always assume what happens on TB stays on TB!

For the majority of the year it was just a Buffer+, Tuner, Bass Comp, JHS Double Barrel, and Pork & Pickle. Then I found out about SushiBox and added a Finally to the end of the chain and that was transformative to my core tone. I had also found the compact pedalboard threads and @el murdoque's Dirt Bender Journal and all of those have been thought provoking, problematic for the wallet, but a very fun journey!

Prior to this I'd been spending a lot of time over in the Luthier's Corner, and I have a lot of dreams and plans for building more basses. However I can't very well keep an eye on the baby from the workshop so for better or worse I end up spending more time reading about pedals and cruising classifieds.
 
For the majority of the year it was just a Buffer+, Tuner, Bass Comp, JHS Double Barrel, and Pork & Pickle. Then I found out about SushiBox and added a Finally to the end of the chain and that was transformative to my core tone. I had also found the compact pedalboard threads and @el murdoque's Dirt Bender Journal and all of those have been thought provoking, problematic for the wallet, but a very fun journey!

Prior to this I'd been spending a lot of time over in the Luthier's Corner, and I have a lot of dreams and plans for building more basses. However I can't very well keep an eye on the baby from the workshop so for better or worse I end up spending more time reading about pedals and cruising classifieds.
As long as you understand that the tone is in the pedals fingers and tone hunting is a hobby in itself, it's a very nice way to waste time and money ;-)

I would never admit that, but I've played gigs with a Nano that held a Sansamp PBDDI, a Strymon BlueSky and a tuner and musicians praised me for the tone I got.
 
  • Like
Reactions: TaylorJ and tidbits
As long as you understand that the tone is in the pedals fingers and tone hunting is a hobby in itself, it's a very nice way to waste time and money ;-)

I would never admit that, but I've played gigs with a Nano that held a Sansamp PBDDI, a Strymon BlueSky and a tuner and musicians praised me for the tone I got.

Oh of course - I hadn't played for a number of years, but after moving back to be closer to family I met up with some old buds and started playing again. The only recording I have is with a bass I assembled playing through my old gear (SansAmp Bass Driver Deluxe > DBX rack compressor > DI out of Eden WT550), and it sounds really great!

I started chafing against switching between presets on the BDD and not having the different settings feel cohesive enough (jumps in gain, large shifts in EQ settings, etc). Having all my different OD flavors separate from the EQ and being able to layer them in to allowed me create the different textures I wanted.
 
Too much. I started adding my bigger board up and was over $500 before I even added a pedal (Temple Audio Duo 17, AC mod, side I/O panel with custom cables, Cioks DC7 and all the patch cables). Then I stopped tabulating.

I have gone through multiple revisions of pedals and boards since I waded in to effects 8 years or so ago. Some of the pedals were quite hard to get at the time, but even though they are more available now the are still pricey. Definitely slowed down buying in the last year+.
 
  • Like
Reactions: Btbp
Was going to look into this anywayto, so here goes:

Noble - 1300
3 Leaf Doom 2 - 333
Audio Kitchen Fake plastic trees - 520
Turbo tuner - 130
EAE Hypersleep V1 - 399
Cog T-16 - 250
LBA 23 Fe+ - 120
Broughton Studio boost mini - 150
Effectrode LA-1A - 580
Broughton BBA - 95
Darkglass Element - 250
Ciocks Sol - 160
Alder&Ash board and case - 600

About 4900 plus cables and barefoot buttons. More than expected…

IMG_5172.jpeg
 
Two guitar boards, one bass board and a two pedal synth "board". I have no interest in doing the math. I can't imagine I would actually replace this gear if something catostrophic happened.

pedalboards.jpg


bassboard.jpg


I don't have a photo of it, but my synth "board" is a Hologram Chroma Console into a Chase Bliss CXM 1978 reverb.
 
  • Like
Reactions: TaylorJ