A multi-meter will let you know for sure. From my past experiences it won't show exactly 4 or 8 0hms,it'll be a little off if I remember correctly.
This is true. It'll read lower than actual impedance.
TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
A multi-meter will let you know for sure. From my past experiences it won't show exactly 4 or 8 0hms,it'll be a little off if I remember correctly.
The large mesh dust cap with the silver center is likely the 8 ohm driver. The other one you described is the 4 ohm based on the Eminence 2512 Deltalite II
I bet anyone a sixpack they couldn't hear the diff b/t a 4 ohm WA and an 8 ohm WA, in a blindfolded test.
I bet anyone a sixpack they couldn't hear the diff b/t a 4 ohm WA and an 8 ohm WA, in a blindfolded test.
I couldn't resist this clock to hang up over my WB rigs.
![]()
Tasty. Very tasty.![]()
So, I haven't had a good chance to give the scout a good tryout until today and, I am pretty sure the speaker is blown. I am getting a fuzz like effect when I play lower notes at higher volumes (regardless of gain settings) that does not happen with a different cab.
Called the GC I bought it from and they are telling me that my only option is to take it into my local GC... An hour and a half away. Oh and they added "sounded great in the store!"
I sent Mesa an email to see if I might have any of the transferable warranty left (I believe that this could have been a store demo as aesthetically it is perfect and still had all the hang tags on it) and it appears to be the latest revision (blackface). In the meantime the head sounds great through my PH 212. Worse case scenario I will have to make the drive to GC but all things considered I am not too bummed. Got the combo for ~770 out the door so I got a good deal regardless.